Photovoltaic Components

Upgrade cable compatible with Voltronic, WeCo brand equipment.

Very interesting complement when purchasing Weco batteries or Voltronic Axpert inverters. Many times the manufacturer will release different firmware updates for the equipment, and it is highly recommended to have the equipment updated with the latest version to guarantee maximum security and performance.

*Requirements: computer with Windows 7 operating system or higher.

Please contact us if you have any questions about the compatibility of your equipment with this cable.

The 50 mm HinaESS power cable kit is necessary for the connection of the battery to our photovoltaic investor. This cable kit is compatible with the HinaESS Powergem 14kWh battery models.

2 x 1,5m long power cables (positive and negative)

Dyness battery power cables. These red/black wires have a length 2m.

This cable kit is necessary to connect Dyness batteries to the corresponding solar inverter. If you already have a Dyness battery plugged in, you won't need these wires.

*These cables are also valid for batteries Pylontech The amount to be recovered shall bear interest from the date of initial application of this Regulation.

Optimizer of solar panels Tigo TS4-RO ideal to optimize the photovoltaic field. The optimizer TS4-RO prevents power losses of solar panels affected by shadows.

The device is installed individually in the affected panels and prevents the performance drop of the rest of panels. It is easy to install, it is only necessary to install it on the affected panels. In addition to offering security, monitoring and synchronization PV2.0, the TS4-R-O optimizes each photovoltaic module when the shadows affect its performance, or in case of mismatching.

- Up to 700W

BlueSolar charge controller with PWM Pro 12V / 24V-20A.
PWM controller 20A 12V / 24V.

Ised the battery in three phases: (maximum load, absorption and flotation) is achieved thereby extend the life of the battery. Protect and optimize the life of the solar installation.

Lighting control function, fully programmable.

Prevents battery discharge at night by the effect return to the solar panel.

* Technical support not included. Eligible separately here.

Supports for solar panels installed on metal tilted or tiled roof in vertical layout

Structure fixation: Metal tilt or tile roof. Type L.

Structure material: Aluminium Al6005-T5 (Anonized)

Stainless Steel Tornillery

Modules to 2400x1150mm

Warranty: 25 years

Not included screw or threaded rod for fixing the bars to the roof or cover.

----

For the fixing material necessary consult here on this link

Deye SUN-SMART-TX01 Smart Transmitter that allows you to turn Deye hybrid inverters into a local hub for Deye Smart Home. This communication module connects to the inverter's metering port to easily pair all Deye devices with LoRa communication.

Communication: LoRa (863–870 MHz) up to a range of ≈200 m

Universal optimizer for solar modules Deye 700W SUN-XL02-A. The DeyeSUN-XL02-A Optimizer avoids power loss of the solar panels affected by shadows.

The device is install individually on affected panels and avoids the downsizing of the other panels. It is easy to install and it is only necessary to install it in the affected panels.

- For solar panels up to 700W and 15A

- Universal

Achieve maximum efficiency for your photovoltaic installation with the Huawei Smart PV SUN2000-600W-P solar panel optimizer. Maximum efficiency per panel (99.5%). Enhance installation flexibility by allowing utilization of entire roofs or rooftops and positioning modules in different inclinations and directions. Huawei panel optimizer prevents system performance loss caused by shading on the installation.

• Exclusive for use with Huawei inverters from the new SUN2000-L1 series or Huawei three-phase inverters from M1, M2, or M3 series
• Allows connection of up to 600W panels of any brand and model.
• Enables monitoring of individual status and performance of each panel.

Load regulator suitable for systems with a power up to 158 W with a power range up to 6 A and with automatic switching of 12/24 V.

The Deye Lora Smart Plug SUN-SMART-PLUG01P1-F is a single-phase smart plug that uses LoRa communication to connect with the Deye solar inverter in the solar installation.

Communication: LoRa*

*A  SUN-SMART-TX01 transmitter is required for LoRa communication with the inverter.

Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof

Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.

Remote Panel for BlueSolar PWM-Pro charge controllers 12V/24V 10A, 20A, 30A

* Technical support not included. Eligible separately here.

Get the maximum performance of your photovoltaic installation with the solar panel optimization Huawei Smart PV SUN2000-450W-P2Maximum efficiency of each panel (99.5%).It increases the flexibility of the installation as it allows you to take advantage of the entire cover or roof and place the modules in different inclinations and orientations.The Panel Optimizer Huawei avoid the system performance loss that would cause shadows to the installation.

• Exclusive for use with investors Huawei series SUN2000-L1, KTL-M1, KTL-M2, KTL-M3 and MKTL-M5
• Enable to connect panels of 450W at the maximum of any brand and model.
• It allows to isolate the functioning of a solar panel affected by shadows or with different orientation within the panel line.

SOLARA SR170CX 12 / 24V 10A Load Regulator.

The SOLAR SOLAR REGULATOR charges the battery according to the battery voltage and battery type at any time with an optimized charging characteristic.