List of products by brand Circutor

Circutor Raption 50 rapid recharge station, are the most advanced rapid recharge equipment on the market. It is used in cases where rapid recharge is required, it is normally applied to the public sector, multi-user and designed for the outdoors. It incorporates CHAdeMO and CSS COMBO2 cable output and AC with mode 3. The Raption 50 has a load power of 50kW in DC. MID reader and RFID reader for identification and activation of the recharge according to ISO 14443 A, anti-vandal TFT touch screen, magnetothermic and differential protections. Possibility of working with the Master-Slave system of the Urban series.

 *CONTACT US FOR PRICES AND AVAILABLE MODELS*

Circutor Raption 150 fast recharging station, are the most advanced rapid recharging equipment on the market. It is used in cases where rapid recharging is needed, it is normally applied to the public sector, multi-user and designed for the outdoors. It incorporates CHAdeMO and CSS COMBO2 cable output. the Raption 150 has a load power of 150kW in DC. MID reader and RFID reader for identification and activation of the recharge according to ISO 14443 A, anti-vandal TFT touch screen, magnetothermic and differential protections. Possibility of working with the Master-Slave system of the Urban series.

 *CONTACT US FOR PRICES AND AVAILABLE MODELS*

Circutor electric vehicle charger, from the eHOME series model T1C16, is the smallest in the series, suitable for private indoor and outdoor garages. Charging 16A - 3.7kW in single phase current, type 1 connector, charging mode 3 in accordance with IEC 61851-1. Easy installation and maintenance, finished in high quality and resistant materials

Charger for electric vehicles Circutor, from the eNext range, it is charging devices for domestic use, very easy to configure, it is installed on the wall. Circutor's eNext series complies with all electrical safety, metered access security and consumption management standards. It is capable of charging up to 22kWh in mode 3, Available in type 1 and type 2 cable, type 2 or shuko base, depending on IEC 61851-1 standard. D. Self-extinguishing ABS-PC plastic finish. It incorporates an App for user authentication and charger configuration. Time programming, bluetooth activation and authentication system.

Charger for electric vehicles Circutor, from the WallBox range, designed for multi-user use in covered parking lots, very easy to configure, it is installed on the wall. The Circutor WallBox complies with all electrical safety, metered access security and consumption management standards, the RVE series incorporates a contactless energy payment system, which facilitates and speeds up the recharging of different users. Available in type 1 and type 2 cable, type 2 or shuko base, and charging in mode 1 (shuko) and mode 3 according to the IEC 61851-1 standard. D. Self-extinguishing ABS-PC plastic finish. Monophasic and triphasic 16A and 32A powers.

Charger for electric vehicles Circutor, from the ePark range, it is charging devices for multi-user use, very easy to configure, it is installed on the wall. Circutor's ePark series complies with all electrical safety standards, has two sockets with type 2 base, with a charging power of 7.4kWh per socket, that is, a total of 14.7kW, MID integrated energy measure, RFID reader for activation and identification of the recharge, ISO 14443 A, magnetothermic and differential protection per outlet, possibility of 3G communications and OCPP 1.5 / 1.6 communications protocol. according to IEC 61851-1 standard. D. Self-extinguishing ABS-PC plastic finish.

Charger for electric vehicles Circutor, from the Urban WB range, it is charging devices for multi-user and outdoor use, very robust construction with aluminum metal body, it is designed to withstand inclement weather and vandalism attacks, easy to configure it install on wall. Circutor's Urban WB series complies with all electrical safety standards, has 1 or 2 outlets depending on the model with type 1 or 2 base, with a load power of 7.4kW (single-phase current) and 22kW (three-phase current), measured of integrated MID energy, RFID reader for activation and identification of the recharge, ISO 14443 A, circuit breaker and differential protection.

Recharging pole for Circutor electric vehicles, from the Urban range, it is charging devices for multi-user use in the open air, very robust construction with an aluminum metal body, it is designed to withstand inclement weather and vandalism, easy to configure, it is installed on the ground. Circutor's Urban series complies with all electrical safety regulations, has 2 type 2 and shuko sockets and recharges in modes 1,2 and 3, with a charging power of 7.4kW (single-phase current) and 22kW (three-phase current) , 14,7kW and 44kW. Integrated MID energy measurement, RFID reader for activation and identification of the recharge, ISO 14443 A, magnetothermic and differential protection per outlet.

Circutor Urban Master-Slave recharge post, these are charging devices for multi-user use outdoors, very robust construction with an aluminum metal body. The Master Slave series tries to simplify the configuration and monitoring system using a master that controls all the charging points and distributes the energy according to its configuration and needs. The advantages are avoiding costs in the installation, saving electricity and less contracted power. It has 2 type 2 and shuko outlets and recharges in modes 1,2 and 3, with a charging power of 7.4kW (single-phase current) and 22kW (three-phase current), 14.7kW and 44kW.