The Fronius Primo 8.2-1 single-phase grid is the largest inverter of the Fronius Primo generation with SnapINverter system, incorporating two MPPT trackers, with a nominal power output of 8.200w, the perfect solution to efficiently manage household consumption.

In addition to its installation and commissioning system (SnapINverter system), with the Fronius Primo 8.2Kw you can control all the movements of the installation thanks to its monitoring system and other accessories, such as the Fronius SMART METER 63A-1, which also Provide data in the monitoring system for injection to red (zero injection).

* Technical support not included. Eligible separately here.

Fronius Primo 8.2-1 On GridInverter

The Fronius Primo 8200W grid inverter is aimed at photovoltaic self-consumption home installations without batteries. It is a pure wave inverter with a grid connection without a transformer that works without batteries, the Fronius Primo is the smallest of its generation and is an excellent solution for homes that want to make the most of the energy produced by solar panels without leaving aside the electrical network.

Features Fronius inverter 8.2-1

The range of Fronius Primo inverters has a power range from 3.0Kw to 8.2Kw, ideal for applications in residential housing, compact and innovative design (Suerflex), easy to assemble thanks to the SnapINverter system make it a high performance grid inverter , with the maximum guarantee.

See Fact Sheet Fronius PRIMO 8.2-1

The Fronius PRIMO 8.2-1 is a grid connection inverter that provides constant information to the user through its monitoring system, you can view instantaneous and historical consumption. The Fronius Primo incorporates WLAN and Ethernet connection, for the transmission of data to the Solarweb portal.

The Fronius Primo can be completed with the Smart Meter, a device that completes the necessary information for your monitoring in addition to ensuring that the inverter does not inject power into the electrical grid.

Fronius Primo 8.2-1 Inverter Monitoring

The Fronius Primo 8.2-1 incorporates web server and WLAN and Ethernet, complying with connectivity standards. The series of Fronius Primo grid inverters are updated automatically, so that you do not have to worry about improving the performance of the solar system. Monitoring through the Solarweb portal.

Fronius anti-seize gripper SMART METER Fronius Primo 8.2-1

Among the accessories of the Fronius 8.2-1 we include the antifouling clamp, the Fronius SMART METER, the bidirectional counter to record the energy consumption of the home, a high precision counter and fast communication through the Modus RTU interface, remote power limitation. Together with the Fronius Solar.web it offers detailed information about household consumption as well as not allowing the injection of energy to the network, that is, we get zero injection to the network.

Download Fact Sheet Fronius SMART METER

Fronius Primo 8.2-1 inverter installation

Installing the Fronius Primo 8.2-1 grid inverter is simple, thanks to its SnapINverter system it can be installed and configured without the need to be an expert, and from Suministros del Sol we offer a connection scheme and technical advice to make it as simple as possible. In addition to being an inverter without batteries we do not need battery storage. The Fronius Primo has a relatively low weight, the entire series is limited to 21.5Kg maximum, and put into operation quickly with tablet and smartphone.

Fronius Primo 8.2-1 inverter warranty

The Fronius PRIMO 8.2-1 grid inverter warranty is 5 years by default, expandable, for more information about extending the warranty of Fronius inverters, please contact us, we will advise you on the extension of the guarantee manufacturer.

Buy Fronius PRIMO inverter 8.2-1

In Suministros del Sol you can buy the Fronius PRIMO 8.2-1 inverter at the best market price, check with us about component and price compatibilities, we will help you in your solar installation project offering an effective solution on the management of energy resources of your housing, making use of the intelligent energy management system.

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.

Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.

Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

This series fuse is suitable for photovoltaic solar power generation system, rated voltage 250V to 1500V, rated current 1A to 30A, used in photovoltaic power generation equipment as a string of photovoltaic module and a photovoltaic array for overcurrent protection, and photovoltaic panels and batteries connected in series and parallel, to charge the variable flux system for short-circuit protection, in the photovoltaic station and the inverter rectifier system for short-circuit protection, as well as for the Photovoltaic power system, input fault voltage and short circuit for protection against rapid breakdown, rated breakdown capacity at 10-50KA, products confirm to IEC60629.1 and 60629.6.

Fuse Holder Features

High temperature resistant housing

Excellent resin shell, smooth surface, more excellent insulation and flame retardant performance, more secure.

6 performance protections

6 major performance protections make your products safer, easier and more reliable.

Applied to products

When the fuse is used in the product, the current is too high, and the short-circuit fuse will automatically disconnect, which makes the product more reliable and safe to use.

Area of ​​application

Stable operation, suitable for a variety of equipment and instruments.

Fuse holder technical characteristics

Type: KY-LY1-D

Fuse size: 10 x 38MM

Poles: 1P

Rated voltage: DC 1000V

Rated current: 1,2,3,4,5,6,8,10,12,15,20,25,30A

Short-circuit breaking capacity: 33KA

Max power attenuation: 3.5W

Protection grade: IP20

Connection: 2.5-10mm2

Operation ambient temperature: -30~+70°C

Resistance and damp hot: Class 2

Elevation: ≤ 2000

Installation way: TH35-7.5/DIN35 Rail installation

RH(relative air humidity): when +20 °C,not exceed 95%;when +40 °C,not exceed 50%

Pollution class: 3

Installation environment: the place of no abvious vibrate & impact

Installation class: 3

WxHxL: W18 x H89 x L90mm

Weight(kg): 0.07

The MC4 Male & Female connector are used to connect several solar panels or groups of solar panels in a solar field, and they are normally used in parallel applications.

The pin is made of high quality machined copper and a sealed tip that can ensure excellent electrical contact.

The MC4 Solar Panel Connectors are the most recommended to ensure a good connection between the connectors that already include the solar panels and our electrical installation. A cable crimper is required to make a firm connection between the connector's metal stem and the electrical wiring. The polarity of the MC4 Solar Panel Connectors must be taken into account since the sign printed on each connector may not coincide with the cable that we are going to connect it.

Characteristics of MC4 Male & Female Connectors

Durable PPO material, lightweight, portable and easy to use.

With excellent aging resistance and UV resistance, it can be used in harsh environment.

You do not need additional instruments for plug removal and removal will not cause any damage to the plugs.

Solid male and female points with a stable self-locking system that is easy to lock and open.

The contacts look like silver copper, which means it has excellent conductivity. The connectors bond so well, with a positive locking mechanism.

Specs:

Nominal Voltage: 1000V

Rated Current: 30A (4.0mm2, 6mm2)

Test Voltage: 6000 V (50 Hz)

Degree of Protection: IP67

Flammability Classification: UL94-V0

Connector Conductive Material: copper, tin

Operating Temperature Range: -40 ℃ ~ + 90 ℃

Security Level: Ⅱ

Adapter Cable: 2.5mm2 / 4mm2 / 6mm2 (AWG 12/14/10)

Connector Contact Resistance: ≤5mΩ

Insertion Force ≤ 50 N

Extraction Force ≥50 N

Interior surface panel 12 Legrand elements

Fronius Smart Meter TS 100A-1 is a bidirectional meter that optimizes self-consumption and records your home's consumption curve. Allows you to record your home's energy consumption.

* Technical support not included.

Fronius Smart Meter TS 100A-1 Bidirectional Meter

Thanks to high-precision measurement and fast communication via the Modbus RTU interface, remote power limitation, when limits are imposed, is faster and more accurate than with the S0 controller. Together with Fronius Solar.web, it provides a detailed view of your home's energy consumption. For the Fronius Energy Package storage solution based on the Fronius Symo Hybrid, the Fronius Smart Meter enables systematic management of different energy flows, thus optimizing the total energy. It is perfect for use with the Fronius Symo, Fronius Symo Hybrid, Fronius Galvo, Fronius Primo, Fronius Eco, and Fronius Datamanager 2.0.

 Download Fronius Smart Meter TS 100A-1 Data Sheet

 Download Fronius Smart Meter TS 100A-1 Warranty Sheet

 Download Fronius Smart Meter TS 100A-1 CE Certificate

 Download Fronius Smart Meter TS 100A-1 Installation Manual

Fronius TS 100A-1 Meter Technical Specifications

Advantages of the Fronius Smart Meter TS 100A-1:

• Fast and accurate remote power limitation.
• Together with Fronius Solar.web, it provides a detailed view of your home's energy consumption.
• Optimizes energy management with the Fronius Energy Package storage solution.

Compatibility

The Fronius Smart Meter is compatible with all inverters with an RS485 (Modbus RTU) interface. The Fronius Smart Meter works in parallel with the Datamanager 2.0 for Fronius IG Plus inverters. The Fronius Smart Meter can be installed at any time together with the Fronius Datamanager 2.0, after the commissioning of an inverter.

Protector combi Alpha + overvoltages P+T 2P, 40A 15kA

Model: EPBOV2SC40

Industrial and tertiary Alpha+ differential.2P, 40A, 30mA.Class AC.6kA

Model: EPR2C040030