Accessories

What accessories and photovoltaic spare parts do you need?

The solar installations are not only composed of solar panels, inverters and batteries, so that they work properly it must be complemented with quality photovoltaic components and accessories, such as wattmeters, charge regulators, cables for solar installations, MC4 female and male connectors for panels solar, terminals for batteries, fuse boxes and many more accessories to achieve extend the life of the installation many years offering the best possible performance.

Read more...

Active filters

  • Deye Smart three-phase sensor - SDM630-Modbus with CT

    €179.00 

    Energy meter and/or zero injection for the inverter series Deye three-phase.

    The model: For the purposes of this Regulation, the following definitions shall apply:

    Size: 98x72x66 in the case of vehicles of categories M1 and N2.

  • Smart Dongle-4G with Hotspot - Communication System Huawei

    €179.95 

    Smart Dongle-4G with Hotspot is the 4G communication system for single-phase and three-phase investors Huawei.

    -Connection Plug & Play

    -Communication 4G

    -Supports up to 10 investors

    - 2 years warranty

    -Admit WLAN Hotspot

  • Technical support and warranty processing

    €114.95 

    Technical Support and Warranty Processing.

    * Valid only for products purchased from us and not installed.

  • In stock

    3 phase monitoring kit SAJ SEC KIT C T80

    €183.00 

    The Kit Sec-C T80 of SAJ it allows the monitoring and parallelization of SAJ Three-phase R5 and R6, up to 10 units with the same meter Chint.

    Monitoring kit eSolar SEC Triphasic, consisting of a wattmeter Chint Triphasic DTSU666 designed for: power monitoring and energy measurement in power systems. It belongs to a generation of intelligent and programmable instrumentation, integrated with measurement and communication functions, mainly for use in real-time measurements and display of electrical parameters such as voltage, current, active power, reactive power, frequency, power factor, and an SEC device for data collection.

    DUE TO STOCK LIMITATIONS , THIS EQUIPMENT IS ONLY SOLD IN CONJUNCTION WITH ITS COMPATIBLE INVESTORS

  • Rack Cabinet 19" 6U 600X600 for 2 US3000 Modules

    €184.00 

    19″ Wall-Mounted Rack Cabinet of 6U 60X60cm made of SPCC cold-rolled steel including:

    • Removable door with 5mm tempered glass.

    • Swing door with over 180º opening angle.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for installing two cooling fans.

    • Mounting screws and accessories for wall mounting supplied.

    • Reliable and sturdy construction.

    • Dimensions 60 x 60 x 37 cm (w/d/h).

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

  • Rack Cabinet 19" 6U 600X600 for 3 US2000 Modules

    €184.00 

    19″ Wall-Mounted Rack Cabinet of 6U 60X60cm made of SPCC cold-rolled steel including:

    • Removable door with 5mm tempered glass.

    • Swing door with over 180º opening angle.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for installing two cooling fans.

    • Mounting screws and accessories for wall mounting supplied.

    • Reliable and sturdy construction.

    • Dimensions 60 x 60 x 37 cm (w/d/h).

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

  • Smart Dongle-4G - Communication System Huawei

    €189.00 

    Smart Dongle-4G is the 4G communication system for single-phase and three-phase investors Huawei.

    -Connection Plug & Play

    -Communication 4G

    -Supports up to 10 investors

    - 2 years warranty

  • Three-phase smart meter GoodWe GM3000

    €194.00 

    Three-phase smart meter GoodWe GM3000

    Three-phase Smart Meter, designed to provide high-precision measurements. Modular design and easy installation. Also available for single phase systems (model GM1000).

    Dimensions (mm): 36 x 85 x 66.5

    Approximate weight (gr): 420

    * Technical support not included. Eligible separately here.

  • Rack Cabinet 19" 9U 600X600 for 2 US5000 Modules

    €195.00 

    19″ Wall-Mounted Rack Cabinet, 9U 60X60cm, made of SPCC cold-rolled steel, including:

    • Removable door with 5mm thick tempered glass.

    • Door opens more than 180º.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from the top and bottom of the cabinet.

    • Prepared to incorporate two cooling fans.

    • Screws and wall mounting accessories supplied.

    • Reliable and rigid construction.

    • Dimensions 60 x 60 x 50 cm (width/depth/height).

    • SUPPLIED UNASSEMBLED.

    MODEL SUPPLIED WITHOUT ACCESSORIES, SHELVES, FAN, THERMOSTAT…

  • Rack Cabinet 19" 9U 600X600 for 3 US3000 Modules

    €195.00 

    19″ Wall-Mount Rack Cabinet of 9U 60X60cm made of cold rolled SPCC steel, including:

    • Removable door with 5mm tempered glass.

    • Swing door with over 180º opening.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for incorporating two cooling fans.

    • Wall-mount screws and accessories provided.

    • Reliable and rigid construction.

    • Dimensions 60 x 60 x 50 cm (w/d/h).

    • SUPPLIED UNASSEMBLED.

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FANS, THERMOSTAT…*

  • Rack Cabinet 19" 9U 600X600 for 4 US2000 modules

    €195.00 

    19" Wall-Mounted Rack Cabinet 9U 60X60cm made of cold-rolled SPCC steel, including:

    • Removable door with 5mm thick tempered glass.

    • Swing door with over 180º opening angle.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for installing two cooling fans.

    • Wall mounting screws and accessories supplied.

    • Reliable and sturdy construction.

    • Dimensions 60 x 60 x 50 cm (w/d/h).

    • SUPPLIED DISASSEMBLED.

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

  • Rack Cabinet 19" 9U 600X600 for 3 Pylontech HV + BMS Modules

    €195.00 

    19″ Wall-Mounted Rack Cabinet of 9U 60X60cm made of SPCC cold-rolled steel including:

    • Removable door with 5mm tempered glass.

    • Swing door with over 180º opening angle.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for installing two cooling fans.

    • Mounting screws and accessories for wall mounting supplied.

    • Reliable and sturdy construction.

    • Dimensions 60 x 60 x 50 cm (w/d/h).

    • SUPPLIED DISASSEMBLED.

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

  • Cloud Connect Advance Tigo CCA + TAP

    €199.00 

    This kit consists of the Tigo TAP access point and Tigo's Cloud Connect Advanced (CCA), one of the smallest solar data recorders on the planet, allowing valuable performance data insights at the module level. It enhances monitoring and security capabilities for Tigo's smart modules.

  • Rack Cabinet 12U 19" 600X600 for 3 US5000 Modules

    €205.00 

    19″ Wall-Mounted Rack Cabinet, 12U 60X60cm, made of SPCC cold-rolled steel, including:

    • Removable door with 5mm thick tempered glass.

    • Door opens more than 180º.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from the top and bottom of the cabinet.

    • Prepared to incorporate two cooling fans.

    • Screws and wall mounting accessories supplied.

    • Reliable and rigid construction.

    • Dimensions 60 x 60 x 64 cm (width/depth/height).

    • SUPPLIED UNASSEMBLED.

    MODEL SUPPLIED WITHOUT ACCESSORIES, SHELVES, FAN, THERMOSTAT…

  • Rack Cabinet 12U 19" 600X600 for 4 Pylontech HV + BMS Modules

    €205.00 

    Wall-Mount Rack Cabinet 19″ 12U 60X60cm made of cold-rolled SPCC steel including:

    • Removable door with 5mm thick tempered glass.

    • Swinging door opening over 180º.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for integrating two cooling fans.

    • Mounting screws and accessories for wall installation included.

    • Reliable and sturdy construction.

    • Dimensions 60 x 60 x 64 cm (w/d/h).

    • SUPPLIED DISASSEMBLED.

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FANS, THERMOSTAT…*

  • Rack Cabinet 12U 19" 600X600 for 4 US3000 Modules

    €205.00 

    19″ Wall-Mount Rack Cabinet with 12U 60X60cm of SPCC cold rolled steel, including:

    • Removable door with 5mm tempered glass.

    • Swing door with over 180º opening.

    • Accessible side panels.

    • Security lock with key.

    • Cable access from top and bottom of the cabinet.

    • Prepared for incorporating two cooling fans.

    • Wall-mount screws and accessories provided.

    • Reliable and rigid construction.

    • Dimensions 60 x 60 x 64 cm (w/d/h).

    • SUPPLIED UNASSEMBLED.

    *MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FANS, THERMOSTAT…*

Continue...

To achieve a quality installation it is necessary to use quality photovoltaic accessories, and if possible at the best price. The accessories and accessories required in the solar installation are pre-set according to the design and characteristics of the installation, a solar installation of 10Kw is not the same as another of 3Kw for example. Each one should be equipped in the best way with respect to its characteristics. To get the solar installation to work properly, do not hesitate to buy the best components and accessories, the solar equipment during its useful life will appreciate it.

In Suministros del Sol we offer you the best solar components and accessories at the best price and we advise you on what are necessary to ensure that the installation works correctly with guarantee and safety. Contact us and reports on what you need for your solar installations.