Filter By
New products
New products
structure for solar panels
Structure for solar panels
To obtain an optimal performance of our solar installation we must not leave to chance something as important as the orientation and position of the solar panels with respect to the sun, the efficiency and effectiveness of the solar panels will depend on it. To obtain the correct position of the solar panels towards the sun we use structures and supports where we install the solar panels. Therefore, it is necessary to make a study of the place where we are going to install the plate field and its orientation to the sun, in order to offer the best positioning alternative for the solar panels compared to the sun and achieve near performance levels for which the solar installation was designed.
Subcategories
-
![Triangular support for 5...]()
- Pack
Triangular support for 5 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€335.62The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for 9...]()
- Pack
Coplanar support for 9 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€348.62Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Inclined support for...]()
In stockInclined support for existing pole 17H - For 1 or 2 solar panels
€349.00- Capacity 1 or 2 Paneles Solares Manufacture from materials of any heading
- Support valid for modules up to 2279x1150mm
- Recommended installation: post support
- For the purposes of this Regulation, the following definitions shall apply:
- Machinery: Stainless steel Hot-rolled steel
- Adjustable inclination of 30°
- Post not included
- Brand name: Sunfer
*For their dimensions, these orders are sent directly from the manufacturer. Delivery time 10-15 working days*
-
![Inclined support with 18H...]()
Out Of Stock In stockInclined support with 18H pole - For 1 or 2 solar panels
€349.00- Capacity 1 or 2 Paneles Solares Manufacture from materials of any heading
- Support valid for modules up to 2279x1150mm
- Recommended installation: post support
- For the purposes of this Regulation, the following definitions shall apply:
- Screw: Stainless steel
- Hot-dipped galvanized steel
- Adjustable inclination from 0o to 15o
- Post included
*For their dimensions, these orders are sent directly from the manufacturer. Delivery time 10-15 working days*
-
![Double inclined support for...]()
- Pack
Double inclined support for panels on flat roof 2x2 panels
€361.20Support Floor / Flat roof
Structure on roof / flat floor FV915 two rows for solar panels, very resistant and robust, made of anodized aluminum and with an inclination of 30º with respect to the ground.Valid for modules of 60 cells (1.65 x 1 m) and 144 cells (2,2x1,1 m).
-
![Coplanar support for 5...]()
- Pack
Coplanar support for 5 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€363.00Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for more...]()
- Pack
Coplanar support for more than 10 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€383.30Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
- IMPORTANT TO READ THE TABLE IN THE DESCRIPTION -
-
![Triangular support for 6...]()
- Pack
Triangular support for 6 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€398.37The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Triangular support for 4...]()
- Pack
Triangular support for 4 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€411.26These supports allow you to correctly orient the panels improving the performance of your solar installation. The structure is made of high strength aluminum and the fasteners are made of stainless steel.
Dimensions of the panels: 2400 x 1100.
Raw aluminum
Inclination 25º.
Horizontal panel installation
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for 6...]()
- Pack
Coplanar support for 6 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€435.61Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Triangular support for 7...]()
- Pack
Triangular support for 7 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€468.43The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for 7...]()
- Pack
Coplanar support for 7 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€508.22Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Triangular support for 5...]()
- Pack
Triangular support for 5 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€514.10These supports allow you to correctly orient the panels improving the performance of your solar installation. The structure is made of high strength aluminum and the fasteners are made of stainless steel.
Dimensions of the panels: 2400 x 1100.
Raw aluminum
Inclination 25º.
Horizontal panel installation
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Triangular support for 8...]()
- Pack
Triangular support for 8 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€531.18The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Double inclined support for...]()
- Pack
Double inclined support for panels on flat roof 2x3 panels
€549.19Support Floor / Flat roof
Structure on roof / flat floor FV915 two rows for solar panels, very resistant and robust, made of anodized aluminum and with an inclination of 30º with respect to the ground.Valid for modules of 60 cells (1.65 x 1 m) and 144 cells (2,2x1,1 m).
-
![Coplanar support for 8...]()
- Pack
Coplanar support for 8 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€580.84Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
Continue...
In Suministros del Sol we offer structures and supports for solar panels of the highest quality, capable of withstanding strong gusts of wind, snow and resistant to electrolytic corrosion. In addition all our structures comply with the regulations of aluminum with respect to its chemical composition S / EN573-3 with respect to the mechanics S / EN755-2 and tolerances.
Aspects to consider before installing a structure for solar panels
Do an average annual study on the areas of wind, radiation and number of days with snow. Apart from the type of roof and surface on which we are going to install the supports, it is necessary to study the geographical situation and the climatic conditions.
The geographical situation is an aspect to be taken into account before installing the structure because through latitude it will indicate which is the optimum degree of inclination for the installation of the solar panels and that we will apply to the structure.
The climatic conditions will condition all the other characteristics to take into account. Among them we find:
Snow, in areas where this phenomenon occurs we must adapt the inclination and alignment of the solar structure so that snow does not accumulate and prevent the panels from absorbing the maximum amount of solar radiation.
Cloudy days, the amount of cloudy days will determine how many photovoltaic modules we must install to get the desired energy, therefore, will determine the dimensions of the solar structure.
Humidity, coastal areas with more humidity or areas with drier climates will determine what type of materials will be used for the construction of the structure and solar panels.
Wind speed, strong gusts of wind will force us to reinforce the fixations and safety of the assembly.
Types of structures for solar panels
Individual structure, designed to be installed on roofs or terraces with flat floor, with horizontal orientation, are used when it is not necessary to install many panels.
Structure with inclined triangle, are structures for solar panels to be installed on flat ground, terraces or roofs with the peculiarity that the modules are in vertical position, which can be installed a greater number of solar panels.
Coplanar structure, these structures are used on inclined surfaces, roofs or terraces. These structures show solutions such as double shingles and stud bolts that facilitate installation and safety, while reducing the visual contrast with the roof.
Other types, the installations of solar orchards, with variable inclination, elevated or for roofs type sandwich we can offer solutions to measure, so that the performance of the solar panels is optimized.
Suministros del Sol makes available to the customer structures for solar panels of the different types at the best price, in addition, our technical team will advise you on which support best meets the conditions of your solar installation, optimizing the performance of the installation. Contact us we will be happy to help you.