Filter By
New products
New products
-
![V2C Alva 7,4kW Dual Charger...]()
V2C Alva 7,4kW Dual Charger - EV Charger
€1,559.00 -€100.00 €1,459.00 -
![V2C Alva 22kW Dual Charger...]()
V2C Alva 22kW Dual Charger - EV Charger
€1,667.00 -€100.00 €1,567.00
structure for solar panels
Structure for solar panels
To obtain an optimal performance of our solar installation we must not leave to chance something as important as the orientation and position of the solar panels with respect to the sun, the efficiency and effectiveness of the solar panels will depend on it. To obtain the correct position of the solar panels towards the sun we use structures and supports where we install the solar panels. Therefore, it is necessary to make a study of the place where we are going to install the plate field and its orientation to the sun, in order to offer the best positioning alternative for the solar panels compared to the sun and achieve near performance levels for which the solar installation was designed.
Subcategories
-
![Coplanar support for 4...]()
- Pack
Coplanar support for 4 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€153.27Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Solar panel mounting system...]()
- Pack
Solar panel mounting system on sheet metal for 6 panels
€172.06Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof
Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.
-
![Coplanar support for 5...]()
- Pack
Coplanar support for 5 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€195.27Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Solar panel mounting system...]()
- Pack
Solar panel mounting system on sheet metal for 7 panels
€196.64Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof
Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.
-
![Triangular support for 3...]()
- Pack
Triangular support for 3 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€202.80The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Triangular support for 2...]()
- Pack
Triangular support for 2 panel. Metal Roof Or Tile - Horizontal Up to 2300x1150
€205.59These supports allow you to correctly orient the panels improving the performance of your solar installation. The structure is made of high strength aluminum and the fasteners are made of stainless steel.
Dimensions of the panels: 2200 x 1100.
Raw aluminum
Inclination 25º.
Horizontal panel installation
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for 3...]()
- Pack
Coplanar support for 3 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€217.77Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Solar panel mounting system...]()
- Pack
Solar panel mounting system on sheet metal for 8 panels
€221.22Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof
Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.
-
![Coplanar support for 6...]()
- Pack
Coplanar support for 6 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€229.95Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Bird Blocker BB85 Anti-Bird...]()
Bird Blocker BB85 Anti-Bird Strip | 30m - 85mm
€234.00The BirdBlocker BB85 bird protection system is the ultimate solution for solar panels: 85mm HDPE pins with UV protection that prevent nests and pests without drilling into the installation. Protect your photovoltaic system from failures and breakages and optimize its performance by ensuring perfect ventilation.
Features:Box of 60 strips, 50cm each. Pin length: 85mm. Total length: 30m.
Material:Black HDPE, recyclable and UV resistant
-
![Bird Blocker BB125...]()
Bird Blocker BB125 Anti-Bird Strip | 30m - 125mm
€242.00The BirdBlocker BB125 bird protection system is the ultimate solution for solar panels: 125mm HDPE pins with UV protection that prevent nests and pests without drilling into the installation. Protect your photovoltaic system from failures and breakages and optimize its performance by ensuring perfect ventilation.
Features:Box of 60 strips, 50cm each. Pin length: 125mm. Total length: 30m.
Material:Black HDPE, recyclable and UV resistant
-
![Solar panel mounting system...]()
- Pack
Solar panel mounting system on sheet metal for 9 panels
€245.80Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof
Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.
-
![Triangular support for 4...]()
- Pack
Triangular support for 4 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€265.55The supports can be oriented correctly to the panels improving the performance of your solar installation. The structure is made of high strength aluminum and stainless steel.
Dimensions of the panels: Until 2400x1150
Installation: Vertical
Inclination: 30º
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Solar panel mounting system...]()
- Pack
Solar panel mounting system on sheet metal for more than 10 panels
€270.38Mounting system for photovoltaic installations on the roof of trapezoidal sheet metal and corrugated iron roof
Very compact, simple and quick to install the mounting system with a completely convincing price-performance ratio.
- IMPORTANT TO READ THE TABLE IN THE DESCRIPTION -
-
![Coplanar support for 7...]()
- Pack
Coplanar support for 7 panel. Metal Roof Or Tile - Vertical Up to 2400x1150
€271.94Supports for solar panels installed on sloping metal or tile roofs in a vertical arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells. Until 2400x1150mm
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
-
![Coplanar support for 4...]()
- Pack
Coplanar support for 4 panel. Metal Roof Or Tile - Horizontal Up to 2400x1150
€290.38Supports for solar panels installed on sloping metal or tile roofs in a horizontal arrangement.
Fixing of the Structure: On inclined metal or tile roofs. Type L.
Structure Material: Aluminium Al6005-T5 (Anodised)
Stainless Steel Screws
Support valid for modules up to 144 cells (2x1m)
Structre guarantee: 25 years.
Does not include screw or threaded rod for fixing the bars to the roof or deck.
----
Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.
Continue...
In Suministros del Sol we offer structures and supports for solar panels of the highest quality, capable of withstanding strong gusts of wind, snow and resistant to electrolytic corrosion. In addition all our structures comply with the regulations of aluminum with respect to its chemical composition S / EN573-3 with respect to the mechanics S / EN755-2 and tolerances.
Aspects to consider before installing a structure for solar panels
Do an average annual study on the areas of wind, radiation and number of days with snow. Apart from the type of roof and surface on which we are going to install the supports, it is necessary to study the geographical situation and the climatic conditions.
The geographical situation is an aspect to be taken into account before installing the structure because through latitude it will indicate which is the optimum degree of inclination for the installation of the solar panels and that we will apply to the structure.
The climatic conditions will condition all the other characteristics to take into account. Among them we find:
Snow, in areas where this phenomenon occurs we must adapt the inclination and alignment of the solar structure so that snow does not accumulate and prevent the panels from absorbing the maximum amount of solar radiation.
Cloudy days, the amount of cloudy days will determine how many photovoltaic modules we must install to get the desired energy, therefore, will determine the dimensions of the solar structure.
Humidity, coastal areas with more humidity or areas with drier climates will determine what type of materials will be used for the construction of the structure and solar panels.
Wind speed, strong gusts of wind will force us to reinforce the fixations and safety of the assembly.
Types of structures for solar panels
Individual structure, designed to be installed on roofs or terraces with flat floor, with horizontal orientation, are used when it is not necessary to install many panels.
Structure with inclined triangle, are structures for solar panels to be installed on flat ground, terraces or roofs with the peculiarity that the modules are in vertical position, which can be installed a greater number of solar panels.
Coplanar structure, these structures are used on inclined surfaces, roofs or terraces. These structures show solutions such as double shingles and stud bolts that facilitate installation and safety, while reducing the visual contrast with the roof.
Other types, the installations of solar orchards, with variable inclination, elevated or for roofs type sandwich we can offer solutions to measure, so that the performance of the solar panels is optimized.
Suministros del Sol makes available to the customer structures for solar panels of the different types at the best price, in addition, our technical team will advise you on which support best meets the conditions of your solar installation, optimizing the performance of the installation. Contact us we will be happy to help you.