Parallel kit for batteries HinaESS for low voltage.

These connectors allow us to connect in parallel several batteries to demand maximum power.

The price includes a positive and negative connector game.

Bracket or brackets for lithium batteries Pylontech US2000C.

This type of support is used when you need to stack more than one Pylontech battery, it is easy to install, and up to 6 modules of the Pylontech US2000C can be installed.

Upgrade cable compatible with Voltronic, WeCo brand equipment.

Very interesting complement when purchasing Weco batteries or Voltronic Axpert inverters. Many times the manufacturer will release different firmware updates for the equipment, and it is highly recommended to have the equipment updated with the latest version to guarantee maximum security and performance.

*Requirements: computer with Windows 7 operating system or higher.

Please contact us if you have any questions about the compatibility of your equipment with this cable.

The 50 mm HinaESS power cable kit is necessary for the connection of the battery to our photovoltaic investor. This cable kit is compatible with the HinaESS Powergem 14kWh battery models.

2 x 1,5m long power cables (positive and negative)

Dyness battery power cables. These red/black wires have a length 2m.

This cable kit is necessary to connect Dyness batteries to the corresponding solar inverter. If you already have a Dyness battery plugged in, you won't need these wires.

*These cables are also valid for batteries Pylontech The amount to be recovered shall bear interest from the date of initial application of this Regulation.

Parallel connectors for WeCo low voltage batteries, enabling parallel connection of multiple batteries to demand maximum power. Their use is optional when using up to 5 batteries in parallel and mandatory for more than 5 batteries (clusters). The price includes one set of positive and negative connectors.

Wall mount compatible with Huawei LUNA2000 batteries. The new modular lithium battery Huawei LUNA2000-5/10/15-S0. This high-voltage battery will be compatible with a wide range of self-consumption inverters on the market, but it is particularly suitable for use with the new single-phase inverters Huawei SUN2000 2-6KTL-L1.

Solplanet LV G3 Battery Base | Lithium Battery Base

The Solplanet LV G3 Battery Base is an essential support designed for the safe and stable installation of Solplanet LB G3 lithium battery modules. It allows for simple integration and expansion of the energy storage system, ensuring maximum stability and organization for your battery modules.

Dimensions: 320 mm x 630 mm x 185 mm

Weight: 2.6 kg

*Not sold separately without corresponding battery unit.

The BMU for BYD LVS or LVL batteries is a prime accessory for managing module charging and discharging, monitoring battery status and protecting cells from overloads, overheating and any problems that may arise.

Protected: IP55

Size: 223x158x51mm Weight: other

What does it need to work?

In addition to the BMU battery management unit, you will need the BYD LVS PDU and BYD LVS battery modules.

BYD Battery-Box LVS batteries are compatible with most hybrid inverters on the market such as SMA, Victron, Goodwe or Deye.Please check with our team if you have any questions about the compatibility of your solar inverter.

* Technical support not included. Eligible separately right here.

19″ Wall-Mounted Rack Cabinet of 6U 60X60cm made of SPCC cold-rolled steel including:

• Removable door with 5mm tempered glass.

• Swing door with over 180º opening angle.

• Accessible side panels.

• Security lock with key.

• Cable access from top and bottom of the cabinet.

• Prepared for installing two cooling fans.

• Mounting screws and accessories for wall mounting supplied.

• Reliable and sturdy construction.

• Dimensions 60 x 60 x 37 cm (w/d/h).

*MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

19″ Wall-Mounted Rack Cabinet of 6U 60X60cm made of SPCC cold-rolled steel including:

• Removable door with 5mm tempered glass.

• Swing door with over 180º opening angle.

• Accessible side panels.

• Security lock with key.

• Cable access from top and bottom of the cabinet.

• Prepared for installing two cooling fans.

• Mounting screws and accessories for wall mounting supplied.

• Reliable and sturdy construction.

• Dimensions 60 x 60 x 37 cm (w/d/h).

*MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*

19″ Wall-Mounted Rack Cabinet, 9U 60X60cm, made of SPCC cold-rolled steel, including:

• Removable door with 5mm thick tempered glass.

• Door opens more than 180º.

• Accessible side panels.

• Security lock with key.

• Cable access from the top and bottom of the cabinet.

• Prepared to incorporate two cooling fans.

• Screws and wall mounting accessories supplied.

• Reliable and rigid construction.

• Dimensions 60 x 60 x 50 cm (width/depth/height).

• SUPPLIED UNASSEMBLED.

MODEL SUPPLIED WITHOUT ACCESSORIES, SHELVES, FAN, THERMOSTAT…

19″ Wall-Mount Rack Cabinet of 9U 60X60cm made of cold rolled SPCC steel, including:

• Removable door with 5mm tempered glass.

• Swing door with over 180º opening.

• Accessible side panels.

• Security lock with key.

• Cable access from top and bottom of the cabinet.

• Prepared for incorporating two cooling fans.

• Wall-mount screws and accessories provided.

• Reliable and rigid construction.

• Dimensions 60 x 60 x 50 cm (w/d/h).

• SUPPLIED UNASSEMBLED.

*MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FANS, THERMOSTAT…*

19" Wall-Mounted Rack Cabinet 9U 60X60cm made of cold-rolled SPCC steel, including:

• Removable door with 5mm thick tempered glass.

• Swing door with over 180º opening angle.

• Accessible side panels.

• Security lock with key.

• Cable access from top and bottom of the cabinet.

• Prepared for installing two cooling fans.

• Wall mounting screws and accessories supplied.

• Reliable and sturdy construction.

• Dimensions 60 x 60 x 50 cm (w/d/h).

• SUPPLIED DISASSEMBLED.

*MODEL SUPPLIED WITHOUT ACCESSORIES, TRAYS, FAN, THERMOSTAT…*