Victron EV Charging Station – Valid for single-phase 7.3 or three-phase 22kW

The vehicle is equipped with a battery charging system

The Victron electric vehicle charging station can be used in single-phase systems providing a maximum of 7,3kW or in three-phase systems with a maximum of 22kW. In photovoltaic systems with equipment Victron Energy can be configured so that excess solar energy is used exclusively for charging the vehicle.

Main features:

- integrated WIFI communication for configuration, monitoring and control.

- full control via VicntronConnect via Wifi or Bluetooth.

- the 4.3-inch touchscreen LCD.

- programmable RGB light ring for indication of load status.

Downloads:

 Vehicle charging station

 In the case of vehicles equipped with an electrical connector, this shall be indicated

 Manual Victron EV charging station 22kW

The vehicle shall be equipped with a battery charger

Manual mode for setting health current

Allows you to set the output current between 6 and 32A. The charging power can be controlled via the LCD screen or via the App.

Automatic mode to ensure maximum efficiency

It detects when there is an excess of solar energy and uses only that energy to charge the vehicle.

Programmed mode for charging electric vehicle at predetermined time intervals.

It is used, for example, to schedule charging at certain hours of the night, when power from the power grid is cheaper.