New products
New products
Three phase inverter Deye 30kW + battery Pylontech PowerCube M1 - Commercial and industrial use kit
Three-phase storage kit Deye + Pylontech for domestic, commercial or industrial use. This kit is ideal for homes or businesses with three-phase connection and installation of up to 20kW of power. It can work both with and without connection to the power grid. *
- Inverter: Deye 30kW SUN-30K-SG01HP3-EU
- Battery: Pylontech PowerCube M1 from 19.6kWh to 109kWh (You can add up to 23 battery modules)
- Wired: Cable kit (From two battery modules, add another cable kit)
- Closet rack: Rack with capacity for 23 modules + BMS (Contact us if you want to add a larger cabinet)
* Electrical protection and wiring: Please contact us to add electrical protection and wiring to your offer
Three phase hybrid inverter Deye SUN-30K-SG01HP3-EU-BM3
Hybrid inverter Deye, the world's leading manufacturer of accumulators.The team Deye For the purposes of this Regulation, the following definitions shall apply: count on full back up integrated so they're able to combine the energy generated by the photovoltaic panels, the energy stored in the battery and the power grid to provide an efficient system that will continue to work even when the power grid goes down. This inverter is valid for self-consumption installations or installations not connected to the electricity grid.
Guarantee: 10 years
Rack Powercube M1 - Battery rack cabinet Pylontech H3201 TO H3202
Compact rack cabinet for Powercube M1 system, valid for up to 23 battery modules Pylontech H32148 + BMS. Increase in storage capacity to 108,93 kWh.
For the purposes of this Regulation: 815x659x2130
Weight (kg): 120 + 47*n
Cable kit for Pylotech Powercube M1
Power cable kit for Powercube M1 of Pylontech.
Cable kit M1: External cable kit + Internal cable kit
*This cable is required to connect the Powercube M1 battery pack to the corresponding inverter.
Lithium battery Pylontech H32148 is 4.74kWh Pylontech Powercube M1
Other, of circular cross-section Pylontech H32148, rack compatible Pylontech Powercube M1. With Lithium-Iron Phosphate (LFP) technology and modular design expandable up to 23 units with 4,47kWh capacity each module.
Pylontech Powercube M1 consists of at least two H32148 battery modules (expandable to 23 units) and a BMS SC100-200 control module.
Size: 330x628x150,5
Weight: 48
Capacity: 4,74 kWh
BMS SC1000-200 for Pylontech Powercube M1
BMS SC1000-200 control module for the management of high voltage batteries Pylontech H32148, rack compatible Pylontech Powercube M1.
Pylontech Powercube M1 consists of at least two H32148 battery modules (expandable to 23 units) and a BMS SC100-200 control module.
Size: 330x628x150,5
Weight: 13
Pack description
Three phase inverter Deye 30kW + battery Pylontech PowerCube M1 - Commercial and industrial use kit
Pack content
Hybrid inverter Deye, the world's leading manufacturer of accumulators.The team Deye For the purposes of this Regulation, the following definitions shall apply: count on full back up integrated so they're able to combine the energy generated by the photovoltaic panels, the energy stored in the battery and the power grid to provide an efficient system that will continue to work even when the power grid goes down. This inverter is valid for self-consumption installations or installations not connected to the electricity grid.
Guarantee: 10 years
Characteristics of the three-phase hybrid inverter Deye For the purposes of this Regulation, the following definitions shall apply:
The investors Deye hybrids are ideal for use in self-consumption facilities where they are used or will be used in future storage batteries.It is also an ideal inverter for installations without power grid connection or for those with poor connection.The built-in backup function will keep the home's electrical system running when the power grid fails.
This team Deye 30kW SUN-30K-SG01HP3-EU-BM3 features 2-MPPT, enables grid or zero injection and is compatible with the latest high-voltage lithium batteries on the market.
Battery compatible with inverter Deye This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union
This three-phase hybrid inverter Deye supports high-voltage lithium batteries to store surplus solar panels, harness energy stored at night and thus maximise savings on the electricity bill.
The hybrid investors of Deye they have a smart load function or back up function that in addition to allowing to operate in isolation with only the battery also helps to maximize the performance of the installation, allowing to combine, solar panels, batteries and the electricity network avoiding as much as possible the energy taken from the network and pouring excess into the network only when the batteries are charged and there are no consumption in the house.
Operating modes of the inverter Deye THIS REGULATION SHALL ENTER INTO FORCE ON THE TWENTIETH DAY FOLLOWING THAT OF ITS PUBLICATION IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION
- Off-grid mode
The hybrid investors Deye they are ideal for homes without mains electricity because of their integrated backup system and because they are compatible with most high-voltage lithium batteries on the market.
- Back up mode
Ideal for homes with poor grid connection or places where the grid is often down for long periods.The hybrid inverter can keep the batteries charged at times when there is a power grid and when the grid goes down, the inverter will continue to supply power to the house directly from the solar panels and the battery.
- Self-consumption mode
The usual mode of use of any house connected to the electricity grid.During sunny hours the house consumes energy from solar panels, if there is a surplus of production this energy can be stored in the battery or be sold to the electricity network.If the power demanded by the house is higher than that produced by the solar panels, the energy will first be taken from the battery and if it is not enough, another part of the electricity network will be taken.
- Mode of sale of surpluses
This inverter Deye it's designed to be injected into the grid so we can sell the surplus photovoltaics to our electricity marketer.
What is included in the hybrid inverter Deye THIS IS THE SUN-30K-SG01HP3-EU-BM3?
- The investor
- Hanging panel
- M screws4x20 stainless steel
- AC connector
- MC4 connector
- Expansion bolt M6x80
- Zero discharge current sensor
- Wifi stick
- The user manual
Compact rack cabinet for Powercube M1 system, valid for up to 23 battery modules Pylontech H32148 + BMS. Increase in storage capacity to 108,93 kWh.
For the purposes of this Regulation: 815x659x2130
Weight (kg): 120 + 47*n
Rack Powercube M1 - Battery rack cabinet Pylontech H3201 TO H3202
Rack cabinet Powercube M1 for storage of lithium batteries Pylontech THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES. Valid from 2 to 23 battery modules + BMS.
For the purposes of this Regulation: 815x659x2130
Weight (kg): 120 + 47*n
Made from SPCC rolled steel. Easily removable side panels. Easy installation with upper and lower cable inlets.
For the purposes of this Regulation, the following definitions shall apply:
Power cable kit for Powercube M1 of Pylontech.
Cable kit M1: External cable kit + Internal cable kit
*This cable is required to connect the Powercube M1 battery pack to the corresponding inverter.
Cable kit for Pylotech Powercube M1
- External cable kit it consists of: 1 orange power cable 3500mm, 1 black power cable 3500mm, 1 can communication cable 3500mm, 1 AC cable 2500mm.
- Internal cable kit it consists of: 1 orange power cable 190mm, 1 black power cable 320mm, 21 positive to negative 240mm, 1 positive negative 350mm. 22 communication wires 180mm. 1 communication cable 500 mm.
Other, of circular cross-section Pylontech H32148, rack compatible Pylontech Powercube M1. With Lithium-Iron Phosphate (LFP) technology and modular design expandable up to 23 units with 4,47kWh capacity each module.
Pylontech Powercube M1 consists of at least two H32148 battery modules (expandable to 23 units) and a BMS SC100-200 control module.
Size: 330x628x150,5
Weight: 48
Capacity: 4,74 kWh
Lithium battery Pylontech H32148 is 4.74kWh Pylontech Powercube M1
The batteries Pylontech H32148 stands out for its modular design with high capacity lithium modules with 4,74kWh. This ideal Powercube M1 rack battery stands out for its great depth in charge/discharge cycles up to 90%.
H32148 modules have up to 6000 cycles, which ensures a long service life. The guarantee is for 7 years, extended to 10 if registered on the manufacturer's website.
It has RS232 or CAN communication.
Battery modules Pylontech H32148 are part of the Powercube M1 battery rack. This storage system stands out for its versatility as it can be adapted to different needs with expandable capacity from 9.48kWh to 109kWh.
In the case of vehicles of categories M1 and N2 Pylontech Powercube M1
The BMS manual SC100-200 Pylontech Powercube M1
Guarantee provided by BMS SC100-200 Pylontech Powercube M1
Main characteristics of the battery module Pylontech
BMS SC1000-200 control module for the management of high voltage batteries Pylontech H32148, rack compatible Pylontech Powercube M1.
Pylontech Powercube M1 consists of at least two H32148 battery modules (expandable to 23 units) and a BMS SC100-200 control module.
Size: 330x628x150,5
Weight: 13
BMS SC1000-200 for Pylontech Powercube M1
The BMS SC1000-200 control unit is essential for the proper functioning of battery modules Pylontech THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES. Thanks to this BMS unit we can control the state of charge and discharge of each cell, temperature, current and voltage.
The BMS SC1000-200 allows us to constantly monitor the battery operation, providing maximum protection and achieving a complete management and alarm system that increases efficiency and extends the lifetime of lithium cells.
In the case of vehicles of categories M1 and N2 Pylontech Powercube M1
The BMS manual SC100-200 Pylontech Powercube M1
Guarantee provided by BMS SC100-200 Pylontech Powercube M1
BMSSC1000-200 main features Pylontech
Three-phase storage kit Deye + Pylontech for domestic, commercial or industrial use. This kit is ideal for homes or businesses with three-phase connection and installation of up to 20kW of power. It can work both with and without connection to the power grid. *
- Inverter: Deye 30kW SUN-30K-SG01HP3-EU
- Battery: Pylontech PowerCube M1 from 19.6kWh to 109kWh (You can add up to 23 battery modules)
- Wired: Cable kit (From two battery modules, add another cable kit)
- Closet rack: Rack with capacity for 23 modules + BMS (Contact us if you want to add a larger cabinet)
* Electrical protection and wiring: Please contact us to add electrical protection and wiring to your offer