close

This store uses cookies and other technologies so that we can improve your experience on our sites.See our Cookies Policy

Hot Deals

Direct Submersible pump kit 0,5 HP

Submersible solar pump kit for wells with controller and solar panels.

Max height 50m

Max flow 14,000 liters / day

Max power 0.5CV


€495.00


€313.00

x 3


€678.00

x 30


€40.50

x 30


€40.50

€12.10


€6.05

x 2


€17.91

€42.35

€1,667.19
Tax included

100% secure payments

Pack description

Submersible pump kit 0,5 HP

Can the solar pump kit be applied to all water pumps?

The solar kit is applied in all types of wells with submersible or surface water pump, which meets the energy consumption characteristics of the solar kit for water pump. If you have any questions about which solar water pump kit to choose, consult us, offering information on the power of the water pump motor, we can offer you the kit that best suits your needs.

The kits offered are general for the powers of the specified pumps, if your water extraction system differs from the proposed kits you can contact us and we will offer you a solar kit for water pumps customized to your needs.

Advantages and disadvantages of installing a solar kit for water pumps

The solar water pump conversion kit does not have problems if it is installed correctly, all that is needed is a small space to install the solar panels and the solar pump controller, otherwise all are advantages. An important aspect to keep in mind is that the solar kit works with varied frequency, this means that the water flow will vary according to the solar radiation, in the hours of more radiation the pump motor will turn more quickly and extract more water .

It is possible to offer a solar kit for a water pump designed for the pump to work "X" hours a day at maximum performance, that is, without varying frequency, in which case you have to install a solar inverter suitable to the conditions of the pump and the number of solar panels may vary.

The advantages are mainly the elimination of the electrical supplies of the conventional network with the economic saving that supposes, in addition we make efficient the extraction of water from the well using clean and renewable energy.

When I recover the investment of solar water pumping

Generally, if the solar kit for water pumps is chosen, the investment is recovered in around 3-7 years depending on the system and characteristics of the water extraction system. Not all systems of water extraction or solar irrigation are amortized in the same periods of time, each system is different and a series of factors depend on the depth of the well, pump power, characteristics and models. In addition to the uses, if it is for direct irrigation or filling of tanks or ponds.

Components of the solar kit for water pumps

The solar kit for pumping water consists of photovoltaic solar panels, varied frequency or solar pumping and lobbied controller (optional) and support for solar panels (optional) and other accessories for assembly, such as trachea staples, fuses, switches etc. .

Solar panels for water pumps

CSUN 460W Mars Series from the brand CSUN, monocrystalline solar panel made with high quality materials.

Panel dimensions: Length 2094mm Width 1038mm Height 35mm Weight 23,5kg

Ideal for both isolated photovoltaic solar energy installations and those connected to the electricity grid. These panels stand out for their incredible quality / price ratio.

Solar Controller Water Pump

Solar controller Ifoun IV10, ideal for solar pumping applications, designed for solar pumps up to 1.5CV of power. The solar controller is a frequency inverter that, according to the photovoltaic production, alters the voltage to adapt it to the water pump.

According to the amount of energy, the frequency inverter will cause the pump to rotate more quickly or more slowly, with the increase in water flow or reduction depending on each case. The solar controller is the heart of any solar water pumping system and having the Ifosun IV10 is a guarantee. Reliability and quality for everyone.

The equipment has a 2 year warranty. At Suministros del Sol we are not responsible for connection failures, misuse and assembly.

From Suministros del Sol we offer to help you in choosing the best solar kit for your water pump, also according to the needs we can offer a custom solar kit, contact us, we will be happy to help you. In our online store you can buy the best solar kit for water pump on the market, with the best advice and after-sales service.

Pack content

Inverter INVT BPD 1K5TN AC, BDP series inverter for high protection solar pump. This inverter adopts the dynamic VI MPPT technology and motor control technology.

Dimensions: 280x300x137mm | Weight: 7Kg


Solar pump inverter INVT BPD 1K5TN AC

Inverter INVT BPD 1K5TN AC, BDP series inverter for high protection solar pump. This inverter adopts the dynamic VI MPPT technology and motor control technology.

INVT BPD 1K5TN AC supports driving single-phase and three-phase 220V motor.

- Support single-phase and 3-phase 220V pump.

- Low startup voltage and wide input voltage range give more possibilities for accepting multi PV strings configurations.

- Bypass function optional.

- Protection class IP65 and fanless system design, with convenient installation and free maintenance advantages.

Technical Specification Inverter INVT 1K5TN AC

Technical specifications for INVT 1K5TN AC

Buy more INVT inverters

In Suministros del Sol you can buy INVT isolated inverters, as well as grid-tied inverters and hybrid inverters. We offer inverters at an economical price and with the highest quality and manufacturer's guarantee. For more information about inverters, consult us, we will hep you without compromise in your project of installation of solar inverter.

The 0.5CV Submersible Pump is a multi-stage submersible water pump that is installed in a well and is used for supplying water to homes, farms, industry and agriculture.

-- THIS PRODUCT CAN ONLY BE ACQUIRED WITH THE SOLAR PUMPING KIT --


Submersible Pump 0.5 CV

The 0.5CV Submersible Pump is a multi-stage submersible water pump that is installed in a well and is used for supplying water to homes, farms, industry and agriculture.

-- THIS PRODUCT CAN ONLY BE ACQUIRED WITH THE SOLAR PUMPING KIT --

The submersible pump is extremely robust and is made of the best quality stainless steel, allowing it to be used for all types of applications.

With fully automatic lines, Hestia manufactures various types of high quality solar panels, this is the Hestia 470W HTS-144M6H470 solar panel.

Size: 2094 x 1038 x 35 mm

Weight: 23.5 kg

12 years product warranty and 30 years linear production warranty over 80%.


Hestia 470W HTS-144M6H470 solar panel

Datasheet Solar panel 470W Hestia

TUV Certificate Solar Panel 470W Hestia

Half-cut Technology

Half-cut cell technology is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module’s power increases by 2%. The reliability of module is also enhanced.

MBB and PERC cell

MBB and PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.

Data sheet

Tipo de Módulo
Monocristalino
Potencia del panel
410W-490W

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

The MC4 Male & Female connector are used to connect several solar panels or groups of solar panels in a solar field, and they are normally used in parallel applications.

The pin is made of high quality machined copper and a sealed tip that can ensure excellent electrical contact.


The MC4 Solar Panel Connectors are the most recommended to ensure a good connection between the connectors that already include the solar panels and our electrical installation. A cable crimper is required to make a firm connection between the connector's metal stem and the electrical wiring. The polarity of the MC4 Solar Panel Connectors must be taken into account since the sign printed on each connector may not coincide with the cable that we are going to connect it.

Characteristics of MC4 Male & Female Connectors

Durable PPO material, lightweight, portable and easy to use.

With excellent aging resistance and UV resistance, it can be used in harsh environment.

You do not need additional instruments for plug removal and removal will not cause any damage to the plugs.

Solid male and female points with a stable self-locking system that is easy to lock and open.

The contacts look like silver copper, which means it has excellent conductivity. The connectors bond so well, with a positive locking mechanism.

Specs:

Nominal Voltage: 1000V

Rated Current: 30A (4.0mm2, 6mm2)

Test Voltage: 6000 V (50 Hz)

Degree of Protection: IP67

Flammability Classification: UL94-V0

Connector Conductive Material: copper, tin

Operating Temperature Range: -40 ℃ ~ + 90 ℃

Security Level: Ⅱ

Adapter Cable: 2.5mm2 / 4mm2 / 6mm2 (AWG 12/14/10)

Connector Contact Resistance: ≤5mΩ

Insertion Force ≤ 50 N

Extraction Force ≥50 N

This series fuse is suitable for photovoltaic solar power generation system, rated voltage 250V to 1500V, rated current 1A to 30A, used in photovoltaic power generation equipment as a string of photovoltaic module and a photovoltaic array for overcurrent protection, and photovoltaic panels and batteries connected in series and parallel, to charge the variable flux system for short-circuit protection, in the photovoltaic station and the inverter rectifier system for short-circuit protection, as well as for the Photovoltaic power system, input fault voltage and short circuit for protection against rapid breakdown, rated breakdown capacity at 10-50KA, products confirm to IEC60629.1 and 60629.6.


Kayal Fuse Holder Features

High temperature resistant housing

Excellent resin shell, smooth surface, more excellent insulation and flame retardant performance, more secure.

6 performance protections

6 major performance protections make your products safer, easier and more reliable.

Applied to products

When the fuse is used in the product, the current is too high, and the short-circuit fuse will automatically disconnect, which makes the product more reliable and safe to use.

Area of ​​application

Stable operation, suitable for a variety of equipment and instruments.

Kayal fuse holder technical characteristics

Type: KY-LY1-D

Fuse size: 10 x 38MM

Poles: 1P

Rated voltage: DC 1000V

Rated current: 1,2,3,4,5,6,8,10,12,15,20,25,30A

Short-circuit breaking capacity: 33KA

Max power attenuation: 3.5W

Protection grade: IP20

Connection: 2.5-10mm2

Operation ambient temperature: -30~+70°C

Resistance and damp hot: Class 2

Elevation: ≤ 2000

Installation way: TH35-7.5/DIN35 Rail installation

RH(relative air humidity): when +20 °C,not exceed 95%;when +40 °C,not exceed 50%

Pollution class: 3

Installation environment: the place of no abvious vibrate & impact

Installation class: 3

WxHxL: W18 x H89 x L90mm

Weight(kg): 0.07