close

This store uses cookies and other technologies so that we can improve your experience on our sites.See our Cookies Policy

Hot Deals

Isolated Solar Kit 33.84kWhday and lithium battery 9.6kWh - Voltronic Axpert VM IV 5.6K-48

Solar photovoltaic kit for home without electric network connection composed of:

Lithium photovoltaic kit 33840w/day for isolated housing, the kit consists of 2lithium pylontech battery 5kwh,1x solar inverter axpert VM IV of 5600W 48V MPPT and 12x solar panels 470w MPPT 144cel. The lithium photovoltaic solar kit for isolated housing is ideal for consumption of up to 5600wthe working tension of the inverter is 48v together with the lithium solar battery Pylontecha combination that offers very good results.The solar kit is ideal for network-isolated houses with low consumption, countryside houses and weekends.

It will require support (not included) for solar panels over the flat surface or over the inclined surface.

x 12



€1,474.80



€705.00

x 2



€2,798.00



€23.60



€21.78

x 2



€12.10

x 4



€35.82

x 2


€24.20



€31.46


€42.35



€24.20

x 40



€54.00

x 40



€54.00

x 4


€26.86

€5,382.62
Tax included

Pack description

Solar Kit Isolated 33.84kWhd and Lithium Battery 9.6kWh - Voltronic Axpert VM IV 5.6K-48

With the solar photovoltaic kit 33840Wh with lithium-ion solar battery by lithium) can be supplied consumption of up to 5600w, now well, let’s calculate what consumption we can supply with the lithium battery for photovoltaic installations Pylontech 5kWhThe.For this we must calculate the consumption of the housing, its households, lighting etc.

We must keep in mind that as a solar photovoltaic installation we will have the battery capacity of autonomy between the oak and sunrise when the solar panels do not generate energy.From the sun supplies in all isolated facilities we recommend the installation of a electrical support generator to the installation when there is, if there is, energy deficit in periods of cloudy days, or of high energy consumption.

Calculate consumption network isolated home for photovoltaic kit with Lithium battery

For example, if you have 4 9W light points for 5 hours a day and a medium-sized A+ refrigerator with a freezer, your daily lighting consumption is 4x9x5 180 Wh per day.A refrigerator consumes between 600Wh/day and 800Wh/day.The sum of all these daily consumptions will be the total, that is, between 780Wh/day and 980Wh/day you need the kit to generate you.

For the case of the lithium 33840wh solar kit we can estimate approximately the consumption it could supply, without taking into account the extensions.

We calculate that the Isolated Housing Solar Plates Kit 33840wh with Lithium Solar Battery it has a battery autonomy of 1-2 days in Zone III in winter with the following consumptions:

10 7 W pump for 3 hours a day

1 Focus of 20 W LED for 4 hours a day

2 TVs of 75 W for 5 hours a day

1 Portable 90 W Order for 4 hours a day

1 Sound Equipment for 2 hours a day

Class A++ refrigerator up to 1.6m

1 microwave for 30 minutes a day

1 water bomb for 0.25kw 20 min daily

1 hair dryer for 15 minutes daily

1 plank for 20 minutes daily

1 coffee for 10 minutes a day

1 swimming pool bomb of 0.75 cv. for 1 hour a day

1 Class A+ washing machine with 3 eco washings per week

1 washing machine with 2 hot washings per week

Components of the Lithium Photo Kit Isolated House 33840wh with Lithium Battery Pylontech

Solar Panels 470w 144 cells

Monocrystalline solar panel made with high quality materials.

Ideal for both isolated and connected photovoltaic solar power installations.These panels stand out for their incredible quality/price ratio.

cuadro1.jpg

Voltronic Axpert VM IV 5600-48

Voltronic Axpert VM IV.New solar inverter of fourth generation of 5600W and 48V.This new equipment includes new techniques, this new model incorporates a Wi-Fi feature, which allows you to carry monitoring from the mobile via the mobile application.

The investor comes with the UBS On-the-Go feature for easy rewrite of internal parameters, data downloads and software updates.The independent design of the battery improves this investor so that functions without connected battery.

The dimensions: 115 x 300 x 400m

Weight: 10kg

Read more about Axpert VM IV 5600 48V

cuadro1.jpg

Lithium battery Pylontech BY US5000

The simplicity and modularity of the US5000 5kWh capacity makes it suitable for performing small capacity energy accumulation systems in self-consumption facilities and large in industrial facilities.The Lithium Battery Pylontech it is one of the best on the market and is highly recommended to compose solar plaque kit, isolated solar kit, and small, medium and large photovoltaic installations due to its extension by modules.Guarantee of Lithium Batteries Pylontech it is 10 years.

cuadro1.jpg

Basic Electric Components

80m cable

4 portfolios + 4 portfolios

Protector of 600V

The interior of 8 elements

4 flexible cable 3x6by mm

Automatic magnetothermic interruptor 25A

2 MC4 connectors

Pack content

The leading manufacturer of solar panels YH SUNPRO is among the Tier1 Bloomberg brands.

Size: 2094 x 1134 x 35 mm

Weight: manufacture from materials of any heading

12 years product warranty and 25 years of linear production guarantee above 84%.

Other


It's called the YH SUNPRO panel

505W monocrystalline Sunpro module the latest technology in photovoltaic cells that guarantees maximum efficiency even in low light conditions.

The Sunpro 505W SP505-132M10 solar panel has a 12-year warranty and is within the Tier1 list of best-selling brands.

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union

Split cell technology

Half-cell technology involves cutting the cell into two separate parts using a mature infrared laser, thereby halving the working current. The thermal loss on the tape is significantly reduced and the power of the module is increased by 2%. The reliability of the module is also improved.

Manufacture from materials of any heading

It incorporates the latest in developing photovoltaic cell technology that increases output per cell from 10 to 20W.

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:

ficha técnica YH SUNPRO 505W SP505-132M10

Data sheets

Module Type
Monocristalino
Panel power
490W-520W

Voltronic Axpert VM IV. New fourth generation 5600W and 48V solar inverter. This new equipment includes new techniques, this new model incorporates Wi-Fi

The inverter comes with UBS On-the-Go function for easy rewriting of internal parameters, data downloads, and software updates. The battery independent design enhances this inverter to function without a battery connected.

- Dimensions: 115 x 300 x 400m

- Weight: 10kg

- Wifi: Android o iOS App monitoring


Inverter Voltronic Axpert VM IV 5600W-48V

Voltronic Axpert VM IV. New fourth generation 5600W and 48V solar inverter. This new equipment includes new techniques, this new model incorporates Wi-Fi

The inverter comes with UBS On-the-Go function for easy rewriting of internal parameters, data downloads, and software updates. The battery independent design enhances this inverter to function without a battery connected.

 Technical Datasheet Voltronic Axpert - Max 5600W 48V

Main characteristics of the new Axpert VM IV 5600W-48V inverter

Ficha Tecnica Inversor Axpert Max 7200w

Technical sheet of the Axpert VM IV 5600W-48V inverter for isolated installations

Ficha Tecnica Inversor Axpert Max 7200w

The hybrid inverter has an 100 amp AC charger for cloudy days

The 80 amp battery charger of this hybrid allows that if the battery ever dies due to bad weather the hybrid inverter can use the source of a generator or electrical network to charge it in a few hours. For example. an 1000 amp battery 80% depleted would replenish your face in about 8 hours. If the load source is a generator, it must be a low harmonic distortion inverter. Non-inverter generators may not be supported by the equipment as having correct margins to run.

All-in-one inverter with LCD where you can see all the data of the solar installation.

On this screen you will monitor the entire system in an easy and intuitive way, voltage and power of the solar panels, consumed power, frequency and output voltage, as well as being able to program a multitude of options and operating priorities. Very intuitive to use.

It includes software for windows and linux where you can monitor the system from a pc to modify values, download historical records, set alarms, ...

Axpert multifunction all-in-one inverter warranty

All axpert all-in-one inverters come with a 2-year warranty (free repair of the inverter provided it is not due to misuse)

New Lithium Battery US5000 Pylontech the capacity is 4.8 kWh.

This battery also has a modular design to facilitate the system capacity expansion as needed, as it has a parallel capacity of up to 16 units.This allows you to reach up to 72.96 kWh of accumulation, without having to add a LV Hub.

Its intelligent BMS protects the battery cells and provides a 95% DoD.

IMPORTANTIf you purchase a module Pylontech to expand your battery rack you will not need Kit of cables.If it is the first module you buy, you will need a cable kit Pylontech connect the battery to the solar inverter.


Features Lithium battery Pylontech US5000 4,8kWh 48V

 Data sheet Pylontech US5000 48V - 4.8kWh lithium battery

 Installation manual Lithium battery Pylontech US25000 48V

The lithium battery Pylontech US5000 of 4.8kWh is formed by Lithium-Ion modules that allows us to have a modular photovoltaic storage system to expand its capacity with up to 16 units without the need for any additional equipment. Among its main features is also the compatibility with many of the investors in the market. Its value for money is another factor to take into account.

Pylontech 48V US5000 offers an easy-to-handle format and fast parallel connection. It contains an internal BMS that is responsible for distributing energy between the cells efficiently and safely, avoiding overload or excessive discharges.

The manufacturer Pylontech offers 7 years warranty for the product as long as the instructions for use are followed. We recommend contacting our technician and following the instructions to keep the battery in perfect condition and meet the requirements of the brand.

The 48V Pylontech US5000 batteries are compatible with inverters for off-grid installations Voltronic Axpert or Victron Energy, as well as economical inverters such as Goodwe. Contact our technical team to know the compatibility of Pylontech with the inverter of your installation.

Características batería Pylontech US5000

Manufacturer's warranty: 7 years (+3 additional years with manufacturer web registration)

To access the additional 3 years of warranty offered by the manufacturer it is necessary to register the product on its website. You can find the form to fill out HERE.

Battery capacity Pylontech US5000 48V

The capacity of each module of the 48V US5000 Pylontech lithium battery is 4.8kWh. The discharge cycles of lithium batteries are much deeper than lead-acid batteries, so the performance and performance make it ideal for self-consumption installations. Thanks to its modular format, up to 16 units can be installed, reaching up to 76.8kWh.

Advantages of LiFePo4 Pylontech US5000 technology

  • Life cycle more than 6,000 cycles, equivalent to approximately 11 years of work, with a final capacity of 80%;
  • The molecular structure of LFP batteries is more stable and therefore safer, allowing a 600°C increase in combustion temperature compared to 300°C for NMC and LCO;
  • They are easy to expand for large storage;
  • Increased depth of discharge (90% DOD);
  • Compact and modular design allows for easy installation/upgrade;
  • Possibility to operate in different temperature conditions;
  • Advanced BMS that allows you to report alarms in real time

Connecting battery modules Pylontech US5000 4.8kWh 48V

conexión módulos pylontech US2000B plus

List of Inverters compatible with batteries Pylontech US5000 48V

See in the following PDF the list of inverters compatible with pylontech US2000C, US3000C and pylontech Powercube X1, H1/H2 and Force H1 batteries

List of Inverters compatible with Pylontech batteries

We especially recommend the use of the Pylontech US5000 battery with the following single-phase and three-phase inverter models:

- Goodwe GW-BP / SBP and GW-ES/EM

- Voltronic Axpert (Isolated Installations)

- Turbo Energy 5k 48V

- Turbo Energy 10k 48V (Three-phase)

- Ingeteam Ingecon SUN Storage 6TL M

Technical specifications Pylontech US5000

The power cord kit Pylontech it's necessary to connect the battery to our photovoltaic inverter. This cable kit is compatible with battery models Pylontech For the purposes of this Regulation, the following definitions shall apply: Pylontech of 24 V UP2500.

Each battery unit includes the interconnection cables between batteries (parallel connection to another battery), while this cable kit is for connecting the inverter.

2 x 2m long power cables (positive and negative)


Electrical wiring sets Pylontech for the battery-inverter connection

Important: The communication cable between battery and inverter is purchased separately. You can buy it right here for investors Deye, Voltronic Axpert VMIII 5000-48, Voltronic Axpert King 5000-48, Voltronic Axpert MAX 7.200-48, Voltronic Axpert VM IV 3.600-24, Voltronic Axpert VM IV 5.600-48, Voltronic Axpert MAX II 8.200-48 as well as for the inverters Ingecon SUN Storage 6 TL M of which Ingeteam.

2M communication cable for connecting Voltronic Axpert inverters with Pylontech lithium batteries. This cable is also compatible with Ingeteam Ingecon SUN Storage inverters with Pylontech US2000C, US3000C or H48050 high voltage batteries.

Important: This cable is suitable for Voltronic Axpert VMIII 5,000-48, Voltronic Axpert King 5,000-48, Voltronic Axpert MAX 7,200-48, Voltronic Axpert VM IV 3,600-24, Voltronic Axpert VM IV 5,600-48, Voltronic Axpert MAX II 8,200-48 as well as for the Ingecon SUN Storage 6 TL M inverters from Ingeteam.

Please contact us if you have any questions about the compatibility of your equipment with this cable. 

The MC4 Male & Female connector are used to connect several solar panels or groups of solar panels in a solar field, and they are normally used in parallel applications.

The pin is made of high quality machined copper and a sealed tip that can ensure excellent electrical contact.


The MC4 Solar Panel Connectors are the most recommended to ensure a good connection between the connectors that already include the solar panels and our electrical installation. A cable crimper is required to make a firm connection between the connector's metal stem and the electrical wiring. The polarity of the MC4 Solar Panel Connectors must be taken into account since the sign printed on each connector may not coincide with the cable that we are going to connect it.

Characteristics of MC4 Male & Female Connectors

Durable PPO material, lightweight, portable and easy to use.

With excellent aging resistance and UV resistance, it can be used in harsh environment.

You do not need additional instruments for plug removal and removal will not cause any damage to the plugs.

Solid male and female points with a stable self-locking system that is easy to lock and open.

The contacts look like silver copper, which means it has excellent conductivity. The connectors bond so well, with a positive locking mechanism.

Specs:

Nominal Voltage: 1000V

Rated Current: 30A (4.0mm2, 6mm2)

Test Voltage: 6000 V (50 Hz)

Degree of Protection: IP67

Flammability Classification: UL94-V0

Connector Conductive Material: copper, tin

Operating Temperature Range: -40 ℃ ~ + 90 ℃

Security Level: Ⅱ

Adapter Cable: 2.5mm2 / 4mm2 / 6mm2 (AWG 12/14/10)

Connector Contact Resistance: ≤5mΩ

Insertion Force ≤ 50 N

Extraction Force ≥50 N

This series fuse is suitable for photovoltaic solar power generation system, rated voltage 250V to 1500V, rated current 1A to 30A, used in photovoltaic power generation equipment as a string of photovoltaic module and a photovoltaic array for overcurrent protection, and photovoltaic panels and batteries connected in series and parallel, to charge the variable flux system for short-circuit protection, in the photovoltaic station and the inverter rectifier system for short-circuit protection, as well as for the Photovoltaic power system, input fault voltage and short circuit for protection against rapid breakdown, rated breakdown capacity at 10-50KA, products confirm to IEC60629.1 and 60629.6.


Fuse Holder Features

High temperature resistant housing

Excellent resin shell, smooth surface, more excellent insulation and flame retardant performance, more secure.

6 performance protections

6 major performance protections make your products safer, easier and more reliable.

Applied to products

When the fuse is used in the product, the current is too high, and the short-circuit fuse will automatically disconnect, which makes the product more reliable and safe to use.

Area of ​​application

Stable operation, suitable for a variety of equipment and instruments.

Fuse holder technical characteristics

Type: KY-LY1-D

Fuse size: 10 x 38MM

Poles: 1P

Rated voltage: DC 1000V

Rated current: 1,2,3,4,5,6,8,10,12,15,20,25,30A

Short-circuit breaking capacity: 33KA

Max power attenuation: 3.5W

Protection grade: IP20

Connection: 2.5-10mm2

Operation ambient temperature: -30~+70°C

Resistance and damp hot: Class 2

Elevation: ≤ 2000

Installation way: TH35-7.5/DIN35 Rail installation

RH(relative air humidity): when +20 °C,not exceed 95%;when +40 °C,not exceed 50%

Pollution class: 3

Installation environment: the place of no abvious vibrate & impact

Installation class: 3

WxHxL: W18 x H89 x L90mm

Weight(kg): 0.07

Industrial and tertiary Alpha+ differential.2P, 40A, 30mA.Class AC.6kA

Model: EPR2C040030

Interior surface panel 12 Legrand elements

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).