close

This store uses cookies and other technologies so that we can improve your experience on our sites.See our Cookies Policy

Hot Deals

30,96kWhday Off grid solar kit with 9,6kWh lithium battery - Voltronic Axpert VM IV 5.6K-48

Lithium Solar Kit 30960Wh off grid Housing

Photovoltaic solar kit 30960w / day for off grid house, the kit consists of 3x pylontech lithium battery 2.4Kw, 1x solar inverter Axpert VM IV 5600w 48v MPPT and 12x solar panels 460w MPPT 144cel. The photovoltaic kit of lithium for isolated housing is ideal for consumption up to 30960w, the working voltage of the inverter is 48v along with the Pylontech lithium battery, a combination that offers very good results. The solar kit is ideal for isolated homes in the network with low consumption, cottages and weekends.

x 12



€2,569.32



€824.00

x 4



€3,796.00



€30.00



€21.78

x 2



€12.10

x 4



€35.82


€12.10


€42.35

x 40



€43.08

x 40



€43.08

x 4


€16.94

€7,502.22
Tax included

Pack description

Lithium solar kit housing 30960w off grid

With the 30960Wh solar kit with lithium battery can consume consumptions of up to 30960w, now, we will calculate that consumption can be supplied with the Pylontech lithium battery 2.4kw. For this we must calculate the consumption of the house, its appliances, lighting etc.

We must bear in mind that being an off grid photovoltaic installation we will have autonomy the capacity of the battery between sunset and sunrise when the solar panels do not generate energy. From Suministros del Sol in all the off grid installations of the network we recommend the installation of a generator set to support the installation when there is, if any, energy deficit in periods of cloudy days, or high energy consumption.

Calculate consumption housing for solar kit 30960w off grid

For example, if you have 4 points of light of 9W for 5 hours a day and a medium class A+ refrigerator with a freezer, your daily consumption in lighting is 4x9x5 = 180 Wh / day. A refrigerator consumes between 600wh / day and 800Wh / day. The sum of all these daily consumptions will be the total, that is, between 780Wh / day and 980Wh / day you need the kit to generate you.

In the case of the 30960wh lithium solar kit, we can estimate approximately the consumptions that it could supply, without taking into account the extensions.

We calculate that the Solar Kit 30960W with Lithium Battery has a battery autonomy of 1-2 days in zone III in winter with the following consumptions:

10 7 W bulbs for 3 hours daily

1 20W LED ceiling spotlight for 4 hours daily

2 75 W TVs for 5 hours a day

1 90 W laptop for 4 hours daily

1 Sound equipment for 2 hours daily

1 Fridge class A ++ up to 1,6m height

1 Microwave for 30 min daily

1 Water pump for 0.25kw 20 min daily

1 Hair dryer for 15 min daily

1 Iron for 20 min daily

1 Coffee machine for 10 min daily

1 0.75 hp pool pump for 1 hour daily

1 Class A + dishwasher with 3 washes in "eco" mode per week

1 Washing machine with 2 hot washes per week

Components Kit Solar off grid House 30960w with Lithium Battery Pylontech

12x Solar Panel 460w 144 cells

CSUN 460W Mars Series from the brand CSUN, monocrystalline solar panel made with high quality materials.

Panel dimensions: Length 2094mm Width 1038mm Height 35mm Weight 23,5kg

Ideal for both isolated photovoltaic solar energy installations and those connected to the electricity grid. These panels stand out for their incredible quality / price ratio.

Productos%20suministros%20%20(1).png

Solar inverter Axpert VM IV 5600-48

Voltronic Axpert VM IV. New fourth generation 5600W and 48V solar inverter. This new equipment includes new techniques, this new model incorporates a Wi-Fi function, this allows you to carry out monitoring from your mobile through the mobile application.

The inverter comes with UBS On-the-Go function for easy rewriting of internal parameters, data downloads, and software updates. The battery independent design enhances this inverter to function without a battery connected.

- Dimensions: 115 x 300 x 400m

- Weight: 10kg

See more information about the inverter Axpert VM IV 5600w 48V

cuadro1.jpg

Pylontech US2000C Plus Lithium Battery

The simplicity and modularity of the US2000C Plus 2.4kWh capacity makes it suitable for small capacity energy storage systems in self-consumption installations and large in industrial installations. The Pylontech lithium battery is one of the best on the market and it is highly recommended to compose kit of solar panels, isolated solar kit, and small, medium and large photovoltaic installations due to its expansion by modules. The warranty of the Pylontech lithium batteries is 10 years.

cuadro1.jpg

Basic electric components

80m single-wire cable

4 fuses + 4 fuse holders10m single-wire cable

600V surge protector

8-element indoor box

4m 3x6mm flexible hose cable

25A Magnetothermic circuit breaker

2 MC4 connector

Pack content

With fully automatic lines, Hestia manufactures various types of high quality solar panels, this is the Hestia 470W HTS-144M6H470 solar panel.

Size: 2094 x 1038 x 35 mm

Weight: 23.5 kg

12 years product warranty and 30 years linear production warranty over 80%.


Hestia 470W HTS-144M6H470 solar panel

Datasheet Solar panel 470W Hestia

Half-cut Technology

Half-cut cell technology is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module’s power increases by 2%. The reliability of module is also enhanced.

MBB and PERC cell

MBB and PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.

Data sheet

Tipo de Módulo
Monocristalino
Potencia del panel
410W-490W

Voltronic Axpert VM IV. New fourth generation 5600W and 48V solar inverter. This new equipment includes new techniques, this new model incorporates Wi-Fi

The inverter comes with UBS On-the-Go function for easy rewriting of internal parameters, data downloads, and software updates. The battery independent design enhances this inverter to function without a battery connected.

- Dimensions: 115 x 300 x 400m

- Weight: 10kg

- Wifi: Android o iOS App monitoring


Inverter Voltronic Axpert VM IV 5600W-48V

Voltronic Axpert VM IV. New fourth generation 5600W and 48V solar inverter. This new equipment includes new techniques, this new model incorporates Wi-Fi

The inverter comes with UBS On-the-Go function for easy rewriting of internal parameters, data downloads, and software updates. The battery independent design enhances this inverter to function without a battery connected.

 Technical Datasheet Voltronic Axpert - Max 5600W 48V

Main characteristics of the new Axpert VM IV 5600W-48V inverter

Ficha Tecnica Inversor Axpert Max 7200w

Technical sheet of the Axpert VM IV 5600W-48V inverter for isolated installations

Ficha Tecnica Inversor Axpert Max 7200w

The hybrid inverter has an 100 amp AC charger for cloudy days

The 80 amp battery charger of this hybrid allows that if the battery ever dies due to bad weather the hybrid inverter can use the source of a generator or electrical network to charge it in a few hours. For example. an 1000 amp battery 80% depleted would replenish your face in about 8 hours. If the load source is a generator, it must be a low harmonic distortion inverter. Non-inverter generators may not be supported by the equipment as having correct margins to run.

All-in-one inverter with LCD where you can see all the data of the solar installation.

On this screen you will monitor the entire system in an easy and intuitive way, voltage and power of the solar panels, consumed power, frequency and output voltage, as well as being able to program a multitude of options and operating priorities. Very intuitive to use.

It includes software for windows and linux where you can monitor the system from a pc to modify values, download historical records, set alarms, ...

Axpert multifunction all-in-one inverter warranty

All axpert all-in-one inverters come with a 2-year warranty (free repair of the inverter provided it is not due to misuse)

Pylontech's lithium battery US2000C is the latest technology frontier for photovoltaic storage applications.

The simplicity and modularity of the US2000C with 2.4kWh capacity makes it suitable for small and large accumulation systems and expandable according to current and future energy needs.

IMPORTANT: If you purchase a Pylontech module to expand your battery rack you will not need a cable kit. If it is the first module you buy you will need the Pylontech cable kit to connect your new battery to the solar inverter.


Features Pylontech US2000C 48V lithium battery

 Technical datasheet Pylontech US2000C 48V - lithium battery 2.4kWh

 Installation manual for lithium battery Pylontech US2000C 48V

The Pylontech US2000C 2.4kWh lithium-ion battery is made up of lithium-ion modules that allow us to have a modular photovoltaic storage system to expand its capacity with up to 16 units without the need for any additional equipment. Among its main features is also the compatibility with many of the inverters on the market. Its price-performance ratio is another factor to take into account.

The 48V Pylontech US2000C offers an easy-to-use format and quick parallel connection. It contains an internal BMS that is responsible for distributing power between the cells efficiently and safely, preventing overcharging or excessive discharging.

The manufacturer Pylontech offers a 7 year warranty on the product as long as the instructions for use are followed. We recommend contacting our technicians and following the instructions to keep the battery in perfect condition and to comply with the requirements of the brand.

Pylontech US2000C 48V batteries are compatible with Voltronic Axpert or Victron Energy off-grid inverters, as well as low-cost inverters such as Goodwe. Contact our technical team for Pylontech's compatibility with your inverter installation. 

frontal batería Pylontech US2000B Plus 48V de 2.4kWh

Manufacturer's warranty: 7 years (+3 additional years with registration on manufacturer's website)

To access the additional 3 years warranty offered by the manufacturer it is necessary to register the product on their website. You can find the form to fill in AHERE.

Capacidad de las batería Pylontech US2000C 48V

The capacity of each module of the Pylontech US2000C 48V lithium battery is 2.4kWh. The discharge cycles of lithium batteries are much deeper than lead batteries, so the performance and features make it ideal for self-consumption installations. Thanks to its modular format, up to 16 units can be installed, reaching up to 38.4kWh.

Advantages of the LiFePo4 technology Pylontech US2000C 

  • Life cycle over 6,000 cycles, equivalent to approximately 11 years of work, with a final capacity of 80%;
  • The molecular structure of LFP batteries is more stable and therefore safer, allowing a 600°C increase in combustion temperature compared to 300°C for NMC and LCO;
  • They are easy to expand to obtain a large storage size;
  • Increased depth of discharge (90% DOD);
  • Compact and modular design allowing easy installation/upgrade;
  • Ability to operate in different temperature conditions;
  • Advanced BMS that allows you to report alarms in real time; Advanced BMS that allows you to report alarms in real time

Connection of Pylontech US2000C 2.4kWh 48V battery modules

conexión módulos pylontech US2000B plus

List of Inverters compatible with Pylontech US2000C 48V batteries

See the following PDF for a list of inverters compatible with pylontech US2000C, US3000C and pylontech Powercube X1, H1/H2 and Force H1 batteries.

List of Inverters compatible with Pylontech batteries

The Pylontech US2000 battery is compatible with models:

- Goodwe GW-BP / SBP and GW-ES/EM.  

- Voltronic Axpert (OFF-GRID Installations)

Technical specifications Pylontech US2000C - US3000C

ficha técnica Batería Pylontech US2000C 48V

The Pylontech current cable kit is necessary for the connection of the battery to our PV inverter. This cable kit is compatible with Pylontech US2000C, US3000C or Pylontech 24V UP2500 battery models.

Each battery unit includes the interconnection cables between batteries (parallel connection to another battery), while this cable kit is for connecting to the inverter.

2 x 2m long power cables (positive and negative)


Important: The communication cable between battery and inverter is purchased separately. You can purchase it here for the Voltronic Axpert VMIII 5,000-48, Voltronic Axpert King 5,000-48, Voltronic Axpert MAX 7,200-48, Voltronic Axpert VM IV 3,600-24, Voltronic Axpert VM IV 5,600-48, Voltronic Axpert MAX II 8,200-48 as well as for the Ingecon SUN Storage 6 TL M inverters from Ingeteam.

2M communication cable for connecting Voltronic Axpert inverters with Pylontech lithium batteries. This cable is also compatible with Ingeteam Ingecon SUN Storage inverters with Pylontech US2000C, US3000C or H48050 high voltage batteries.

Important: This cable is suitable for Voltronic Axpert VMIII 5,000-48, Voltronic Axpert King 5,000-48, Voltronic Axpert MAX 7,200-48, Voltronic Axpert VM IV 3,600-24, Voltronic Axpert VM IV 5,600-48, Voltronic Axpert MAX II 8,200-48 as well as for the Ingecon SUN Storage 6 TL M inverters from Ingeteam.

Please contact us if you have any questions about the compatibility of your equipment with this cable. 


Important: The communication cable between battery and inverter is purchased separately. You can purchase it here for the Voltronic Axpert VMIII 5,000-48, Voltronic Axpert King 5,000-48, Voltronic Axpert MAX 7,200-48, Voltronic Axpert VM IV 3,600-24, Voltronic Axpert VM IV 5,600-48, Voltronic Axpert MAX II 8,200-48 as well as for the Ingecon SUN Storage 6 TL M inverters from Ingeteam.

The MC4 Male & Female connector are used to connect several solar panels or groups of solar panels in a solar field, and they are normally used in parallel applications.

The pin is made of high quality machined copper and a sealed tip that can ensure excellent electrical contact.


The MC4 Solar Panel Connectors are the most recommended to ensure a good connection between the connectors that already include the solar panels and our electrical installation. A cable crimper is required to make a firm connection between the connector's metal stem and the electrical wiring. The polarity of the MC4 Solar Panel Connectors must be taken into account since the sign printed on each connector may not coincide with the cable that we are going to connect it.

Characteristics of MC4 Male & Female Connectors

Durable PPO material, lightweight, portable and easy to use.

With excellent aging resistance and UV resistance, it can be used in harsh environment.

You do not need additional instruments for plug removal and removal will not cause any damage to the plugs.

Solid male and female points with a stable self-locking system that is easy to lock and open.

The contacts look like silver copper, which means it has excellent conductivity. The connectors bond so well, with a positive locking mechanism.

Specs:

Nominal Voltage: 1000V

Rated Current: 30A (4.0mm2, 6mm2)

Test Voltage: 6000 V (50 Hz)

Degree of Protection: IP67

Flammability Classification: UL94-V0

Connector Conductive Material: copper, tin

Operating Temperature Range: -40 ℃ ~ + 90 ℃

Security Level: Ⅱ

Adapter Cable: 2.5mm2 / 4mm2 / 6mm2 (AWG 12/14/10)

Connector Contact Resistance: ≤5mΩ

Insertion Force ≤ 50 N

Extraction Force ≥50 N

This series fuse is suitable for photovoltaic solar power generation system, rated voltage 250V to 1500V, rated current 1A to 30A, used in photovoltaic power generation equipment as a string of photovoltaic module and a photovoltaic array for overcurrent protection, and photovoltaic panels and batteries connected in series and parallel, to charge the variable flux system for short-circuit protection, in the photovoltaic station and the inverter rectifier system for short-circuit protection, as well as for the Photovoltaic power system, input fault voltage and short circuit for protection against rapid breakdown, rated breakdown capacity at 10-50KA, products confirm to IEC60629.1 and 60629.6.


Kayal Fuse Holder Features

High temperature resistant housing

Excellent resin shell, smooth surface, more excellent insulation and flame retardant performance, more secure.

6 performance protections

6 major performance protections make your products safer, easier and more reliable.

Applied to products

When the fuse is used in the product, the current is too high, and the short-circuit fuse will automatically disconnect, which makes the product more reliable and safe to use.

Area of ​​application

Stable operation, suitable for a variety of equipment and instruments.

Kayal fuse holder technical characteristics

Type: KY-LY1-D

Fuse size: 10 x 38MM

Poles: 1P

Rated voltage: DC 1000V

Rated current: 1,2,3,4,5,6,8,10,12,15,20,25,30A

Short-circuit breaking capacity: 33KA

Max power attenuation: 3.5W

Protection grade: IP20

Connection: 2.5-10mm2

Operation ambient temperature: -30~+70°C

Resistance and damp hot: Class 2

Elevation: ≤ 2000

Installation way: TH35-7.5/DIN35 Rail installation

RH(relative air humidity): when +20 °C,not exceed 95%;when +40 °C,not exceed 50%

Pollution class: 3

Installation environment: the place of no abvious vibrate & impact

Installation class: 3

WxHxL: W18 x H89 x L90mm

Weight(kg): 0.07

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).

The 4mm solar cable is made of flexible tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer sheath. These solar cables are TUV-Rheinland approved.

Solar cables are suitable for use in all photovoltaic systems for wiring solar modules as well as connection to the AC / DC inverter.


Characteristics of the 4mm Solar Cable

Flexible black and red tinned copper with halogen-free copolymer insulation and a UV-resistant halogen-free copolymer jacket.

Inner conductor: flexible tinned copper wire. 4.0 mm solar cable range.

Maximum voltage: 1.2 kV AC (1.8 kV DC).

Suitable for use in all photovoltaic systems for wiring of solar modules and connection to the AC / DC inverter. MC4 solar connectors.

Cable image and colors are illustrative only and may vary.

Mechanical characteristics:

Inner conductor: flexible tinned copper wire.

Dielectric: LSZH halogen-free copolymer.

halogen-free copolymer LSZH.

(Resistant to UV rays).

Color: black.

Insulation diameter: see below.

Operating temperature: - 40 ° C to 90 ° C.

Minimum installation temperature: -5 ° C.

Electrical characteristics:

DC resistance conductor 2.50 mm2 ≤ 7.98 Ω / km.

4.00 mm2 ≤ 4.95 Ω / km.

6.00 mm2 ≤ 3.30 Ω / km.

10.00 mm2 ≤ 1.91 Ω / km.

Operating voltage: 0.6 / 1.0 kV AC (0.8 / 1.5 kV DC).

Maximum voltage: 1.2 kV AC (1.8 kV DC).