close

This store uses cookies and other technologies so that we can improve your experience on our sites.See our Cookies Policy

Hot Deals

Triangular support for 6 panel. Metal Roof Or Tile - Horizontal Up to 2350x1250

These supports allow you to correctly orient the panels improving the performance of your solar installation. The structure is made of high strength aluminum and the fasteners are made of stainless steel.

Dimensions of the panels: 2350 x 1250.

Raw aluminum

Inclination 25º.

Horizontal panel installation

Does not include screw or threaded rod for fixing the bars to the roof or deck.

----

Add as many rows to your shopping cart as necessary. For Example: To install 7 solar panels in two rows of 3 and 4 panels, you will have to add to your cart 1 row of 3 panels and another row of 4 panels. It is not possible to buy a single row of 7 panels and then make the distribution in more than one row because the components included may vary.


€16.02

x 12


€364.32

x 12


€24.80

x 10


€21.30

x 4


€8.52

x 24


€51.12

x 12


€172.92

€659.00
Tax included

Pack description

Characteristics

Designed to improve its durability outdoors, complies with the regulations regarding its chemical composition, mechanical and tolerances S / EN573-3, S / EN755-2 and U.N.E.-EN 755-9: 2001. In addition, the support legs are made of anodised aluminum and A2-70 stainless steel screws are used in compliance with DIN / ISO 4759, DIN / ISO 3269, DIN / ISO 3506, DIN / ISO 8992 and DIN / ISO 267.

These models are installed on ground, the inclination of the upper part is 30º, ideal for the optimal orientation of the solar panels, in addition to the physical characteristics of these supports it is advisable to ensure the correct choice of their location, making the most of the hours of sun and avoiding shadows that harm the good functioning of solar equipment as a whole.

The layout of the panels will be 1 rows per number of panels and are placed horizontally.

These supports allow you to correctly orient the panels improving the performance of your solar installation. With an inclination of the anchoring surface of 30º with respect to its horizontal axis and we can locate it on any surface with or without screws. The structure is made of high strength aluminum and the hardware is made of stainless steel.

Dimensions of the panels: 2350 x 1250.

Raw aluminum

Inclination 25º.

Installation

The package includes all the material and accessories necessary for assembly, both screws and accessories for the anchoring of solar panels. In addition, an instruction manual is included.

The compatibility of the solar panels with the support or structure must be ensured.

For elevated structures ELV or for other structures and supports as well as the rest of the components of the photovoltaic installation from Suministros del Sol we recommend that the assembly, configuration and testing be carried out by qualified personnel. We are not responsible for problems associated with poor assembly and handling by unqualified and authorized personnel.

To offer an integral and quality service we offer our team of professional and experienced installers, with them you will not have to worry and you will be satisfied with your purchase.

Suministros del Sol offers to advise you and help you in everything you need to choose your solar equipment.

Contact us, we will be happy to help you.

Pack content

The Pro Standard Guide is available in various sizes so that you can correctly configure the installation.


Standard Pro Guide 115 cm

The Pro Standard Guide is available in various sizes so that you can correctly configure the installation.

The Pro Standard Guide is available in various sizes so that you can correctly configure the installation.


Standard Pro Guide 225 cm

The Pro Standard Guide is available in various sizes so that you can correctly configure the installation.

Use this piece to join two pro standard guides, it is very simple, just fit it in the slots that the guides already have and tighten.


Splice Guide Pro Standard

Use this piece to join two pro standard guides, it is very simple, just fit it in the slots that the guides already have and tighten.

Staple to fasten modules to the Pro Standard Guide. Adaptable to different profiles. We will use it for the intermediate fasteners


Inter Clamp 40

Staple to fasten modules to the Pro Standard Guide. Adaptable to different profiles. We will use it for the intermediate fasteners.

Staple to attach modules to the Pro Standard Guide. Serves for 35 and 40mm profiles. We will use it for the beginning and the end of the rows.


End Clamp 35/40

Staple to attach modules to the Pro Standard Guide. Serves for 35 and 40mm profiles. We will use it for the beginning and the end of the rows.

Multi-function staple that attaches to our Pro Standard Guide. We can use it for multiple solutions, to mount on Triangles, on a coplanar base where we do not want to give height, on another type of profile, etc.


Guide clip for triangle

Multi-function staple that attaches to our Pro Standard Guide. We can use it for multiple solutions, to mount on Triangles, on a coplanar base where we do not want to give height, on another type of profile, etc.

Aluminum triangles of the size you need, both for horizontal and vertical mounting. They serve as the basis for our Pro Standard Guide.


Aluminum triangle 30º 800x800x421mm (Horizontal)

Aluminum triangles of the size you need, both for horizontal and vertical mounting. They serve as the basis for our Pro Standard Guide.